Hitachi CP-S420WA/CP-X430WA/CP-X430W RS-232C communication, Communications setting, Protocol

TECHNICAL (continued)

RS-232C communication

(1)Turn off the projector and computer power supplies and connect with the RS-232C cable.

(2)Turn on the computer power supply and, after the computer has started up, turn on the projector power supply.

					Projector	Computer		RS-232C jack
Control jack					1	1	CD	D-sub 9-pin
					2	2	RD
D-sub 15-pin shrink jack					3	3	TD	1	2	3 4	5
15	14	13	12	11	4	4	DTR
					8	8	CTS	6	7	8	9
	10	9	8	76	5	5	GND
					SELO 6	6	DSR
					RTS 7	7	RTS
					9	9	RI
					GND 10
					11
					12
					RD 13
					TD 14
					15

Communications setting

19200bps, 8N1

1 Protocol

Consist of header (7 bytes) + command data (6 bytes).

2 Header

BE + EF + 03 + 06 + 00 + CRC_low + CRC_high

CRC_low : Lower byte of CRC flag for command data.

CRC_high : Upper byte of CRC flag for command data.

3 Command data

Command data chart

byte_0	byte_1	byte_2		byte_3	byte_4	byte_5
Action			Type		Setting code
low	high	low		high	low	high

		Action (byte_0 - 1)
Action	Classification		Content
1	SET		Change setting to desired value.
2	GET		Read projector internal setup value.
4	INCREMENT		Increment setup value by 1.
5	DECREMENT		Decrement setup value by 1.
6	EXECUTE		Run a command.

TECHNICAL - 6

Downloaded from www.Manualslib.com manuals search engine