Contents, E250P/P12SW subwoofers

E250P/P12SW subwoofers

- CONTENTS -

BASIC SPECIFICATIONS …………….……..…………..1

SAFETY INFORMATION …………….……..….………..2

E250P PACKING……..………………….….….….……...3

P12SW PACKING……..……………………….…………4

DETAILED SPECIFICATIONS ……….……..…………..5

CONNECTIONS………………………...……..…...…..…6

OPERATION ……..………………….……...…….….…...9

BASIC TROUBLESHOOTING…………………………..10

E250P EXPLODED VIEW/PARTS LIST……………….11

P12SW EXPLODED VIEW/PARTS LIST……….……..12

TEST SET-UP AND PROCEDURE….…………………13

AMPLIFIER BLOCK DIAGRAM…………………………14

E250P BULLETIN JBL2005-01..……………..… ……..15

E250P/P12SW TECH TIP JBLTT2003-04 ..…….…...16

DETAILED TROUBLESHOOTING……………………..17

P.C.B. DRAWINGS……………………………………….20

ELECTRICAL PARTS LIST ..……….……….……….…24

IC/TRANSISTOR PINOUTS..……..….…….….….….….28

SCHEMATICS……………………….……………………29

E250P, P12SW SPECIFICATIONS

Amplifier Power (RMS):	250 Watts
Peak Dynamic Power *:	E250P: 550 Watts
	P12SW: 500 Watts
Driver:	12" (305mm) PolyPlas™
Inputs:	Line Level (switchable to LFE) and Speaker Level
	with 5-way binding posts
Low-Pass Frequency:	Variable from 50Hz to 150Hz
Frequency Response:	25Hz – Low-pass crossover setting
Dimensions (H x W x D):	19-3/4" x 14-3/8" x 16-1/2"
	(502mm x 365mm x 419mm)
Weight:	43 lb/19.5kg

JBL continually strives to update and improve existing products, as well as create new ones. The specifications and details in this and related JBL publications are therefore subject to change without notice.

*The Peak Dynamic Power is measured by recording the highest center-to-peak voltage measured across the output of a resistive load equal to minimum impedance of the transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.