Hitachi CP-X960W Connection to the video signal terminals, Connection to the RGB signal terminal

Connection to the video signal terminals

1. Input signals

S-VIDEO signal		Brightness signal	1.0V p-p, 75 Ω terminator
		Color signal	0.286V p-p (burst signal), 75 Ω terminator
VIDEO signal			1.0V p-p, 75 Ω terminator
Audio signal	Input		200mV rms, 20k Ω or less (max. 3.0V p-p)
	Output		0∼200mVrms,1k Ω

2. Signal input jacks

Color signal Brightness signal

Ground Ground

S-VIDEO input (mini DIN 4-pin)

Caution	The priority sequence of the video input jacks is as follows.
	(1) S-VIDEO input jack	(2) RCA jack input jack

When video signals are being projected, the audio input by the video is output to the audio output jack (RGB/VIDEO).

Connection to the RGB signal terminal

1. Input signals

Video signal			Analog, 0.7V p-p, 75 Ω terminator (positive polarity)
Horizontal sync signal			TTL level (positive/negative polarity)
Vertical sync signal			TTL level (positive/negative polarity)
Compound sync signal			TTL level
Audio signal		Input	200mV rms, 20k Ω or less (max. 3.0V p-p)
			0~200mVrms,1k Ω
		Output
2. Signal input jacks
1	Video input (red)		9	N.C
2	Video input (green)		10	Ground
3	Video input (blue)		11	N.C
4	N.C		12	DDC jack (Display Data Channel)
5	N.C		13	Horizontal sync signal/compound sync signal
6	Ground (red)		14	Vertical sync signal
7	Ground (green)		15	DDC jack (Display Data Channel)

D-sub 15-pin shrink jack

8 Ground (blue)

22