TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power. 8 ～ 12
WARNING When the power is ON, a strong light is emitted. Do not look into the lens.
|
|
| STANDBY/ON |
VIDEO | RGB | SEARCH |
|
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
|
|
|
| END | PAGE DOWN | MUTE |
OFF |
|
|
|
FREEZEKEYSTONE
Control panel
LANP 
TENP 
POWER 
STANDBY/ON INPUT KEYSTONE RESET
1 | Make sure that the power cord is firmly and |
| correctly connected to the projector and outlet |
| 3 |
|
|
|
|
2 | Turn on the projector's power |
Set the power switch to [ ] (ON). The projector will go |
to STANDBY mode and the POWER indicator will light to solid orange.
power switch
POWER indicator
A
T | POW | LANP |
YSTONE | TENP | |
RESET | ER | |
KE | YSTONE | PO |
| TE | LANP |
|
| ||||
|
| RESET | WER |
|
|
|
|
|
|
|
REWOP | TESER | ENOTSYEK |
|
|
PNET |
|
| TUPNI | N |
PNAL |
|
|
| O/YBDNATS |
3 Press the STANDBY/ON button (control panel or remote control)
•The projector begins warming up and the POWER indicator blinks green.
NOTE Turn the power on/off in right order.
•Power on the projector before the computer or video tape recorder.
•Power off the projector after the computer or video tape recorder.
• The POWER indicator stops blinking and lights to solid green once the projector's power is completely on.
4 | Remove the lens cap |
The picture is projected. |
STANDBY/ON
14
Downloaded from www.Manualslib.com manuals search engine