JBL SYN 3 manual Room Reflections

Page 11

ROOM REFLECTIONS

The most troublesome room reflections are usually the early reflections of the LCR speakers off the floor, ceiling and side walls. These reflections reach the listener’s ears delayed with respect to direct sounds and blur the perceived image. They can also degrade dialog intelligibility, through the same mechanisms.

The design of the THX LCR speakers minimizes the floor and ceiling reflections. As an extra enhancement, it is often a good idea to place a thick, absorptive carpet between the front speakers and the listening position, just to further reduce this primary reflection from floors with hard surfaces. A rug made from wool will generally have more uniform absorption characteristics than one made from synthetic fibers.

The THX LCR speakers have broad dispersion in the horizontal plane in order to ensure a wide usable listening area. This design choice can induce reflections off of the side walls, especially in installations where they are relatively close to the front speakers. These reflections can be reduced simply by angling the left and right speakers inward somewhat.

If giving the speakers some “toe-in” is not enough, the next step is the strategic place- ment of absorptive materials on the side walls. These range from commercially available fiberglass and dense foam to heavy draperies and even large, overstuffed furniture. The optimal position for these materials can be found with a small hand mirror and an assis- tant. Sit at the primary listening position and have the assistant slowly slide the mirror

along the wall. When you can see any of the front speakers reflected in the mirror, mark the wall at the mirror for later placement of absorptive material.

A variation of this method is especially helpful in rooms which are already fairly “dead” acoustically. Rather than using absorptive materi- al in rooms like these, try using diffusion instead.

9

Image 11
Contents Harman International Company Speakers Contents Introduction Speaker Placement S3HC Center Channel Speakers S3VCMin Page Preparing the Hookup Wire Connecting the Speakers to the Rest of Your SystemAcoustical Problems in Listening Rooms Fine Tuning Your Audio SystemRoom Reflections Room Absorption for Home Theatre Systems Excessive USE of Absorptive MaterialsSlap Echoes Background Noise RattlesBackground Noise Solutions Standing Waves Standing Wave Solutions Room RatiosStanding Wave Solutions Speaker Placement Standing Wave Solutions Room Equalization Standing Wave Solutions AbsorptionFrom speaker Troubleshooting3dB Specifications

SYN 3 specifications

The JBL SYN 3 is a cutting-edge studio monitor that encapsulates the essence of professional audio engineering. Designed for musicians, producers, and audiophiles alike, this model combines advanced technology with superior sound quality, ensuring that every detail of your audio comes to life with clarity and precision.

One of the standout features of the JBL SYN 3 is its innovative three-way design. This configuration includes a high-frequency tweeter, a mid-range driver, and a robust woofer, allowing for a well-balanced frequency response that covers a broad spectrum of sounds. With a frequency range that reaches from 45 Hz to 24 kHz, the SYN 3 captures low thumping bass as easily as the delicate nuances of high notes, making it an ideal choice for a range of applications, from mixing and mastering to casual listening.

The SYN 3 utilizes JBL’s proprietary Image Control Waveguide technology. This engineering marvel enhances the stereo image, ensuring accurate spatial representation. Such precision in sound placement means that listeners can experience a more immersive audio environment, crucial for any sound mixing task where every detail counts.

In terms of power, the JBL SYN 3 is equipped with an impressive built-in amplifier system that offers substantial output while maintaining fidelity. With a total power output of 250 watts, this monitor can handle peaks without distortion, making it suitable for both quiet studio environments and louder setups. The rear ported design further optimizes bass response and minimizes unwanted resonances, allowing for accurate bass reproduction in any space.

Another key characteristic is the versatility of connection options. The SYN 3 features balanced XLR and TRS inputs, making it compatible with various audio interfaces and mixing consoles. This flexibility ensures that no matter the setup, integrating the SYN 3 into a sound system is seamless.

Durability and aesthetics have also not been overlooked; the speaker's enclosure is manufactured from high-quality materials designed to reduce resonance and provide a sleek and professional appearance. Available in a sleek black finish, it can easily blend into any studio decor.

Overall, the JBL SYN 3 is an exceptional tool for audio professionals, featuring advanced technology, ambitious design, and superior sound quality that can elevate any audio project. Its precision, power, and versatility make it a worthy addition to any studio setup, fulfilling the demands of contemporary music production while remaining true to JBL's legacy of excellence.