JBL SYN 3 manual Min

Page 7

right speakers. The horn in the center channel speaker should be no more than two feet higher or lower than the horns in the left and right speakers. This preserves the “localization integrity” of “sound pans”, in which the sound appears to move from left to center to right. Having it also appear to go from high to low to high, or vice versa, can destroy the illusion of such effects and should also be avoided. Use of speaker stands can help achieve this goal.

SUBWOOFERS - The location of subwoofers is the most flexible aspect of placement. The convention is to place them on or very near to the floor. The subwoofers can be placed on both sides of the television set or projection screen, with the left and right speakers stacked on top. If this arrangement is not feasible, then they can be placed in the corners of the room. It is recommended that you experiment with the various positions to see which suits you both sonically and aesthetically.

Min. 2'-0"

SURROUNDS - The ambient surround speakers work optimally if they are placed as far back from the screen as the viewing chairs are. If there are two rows of chairs, these speakers should be placed between them.

The ambient surround speakers should not be placed to radiate directly at the listeners. Rather, they should echo off the front and rear walls, or optionally, off the ceiling, to create a sound space that encloses the listener. The listeners should be locat- ed in a “null zone” in which no sound is directly radiating at them from the ambient surrounds. Always make sure that the null baffle (the side w/no speakers or speaker terminals) points towards the listening area.

The ambient surround speakers should be placed higher than the seating area, at least two feet above seated ear level.

The preferred method to mount the ambient surrounds is to put them directly on side walls with brackets, or to stack them atop a column attached to the wall. This lets each speaker radiate to the front and back of the room, and to reflect off the side walls.

There are a few instances in which the ambient surrounds would do better if mounted on the ceiling rather than the walls. If one or both of the walls is “acoustically dead”,

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Harman International Company Speakers Contents Introduction Speaker Placement S3HC Center Channel Speakers S3VCMin Page Preparing the Hookup Wire Connecting the Speakers to the Rest of Your SystemAcoustical Problems in Listening Rooms Fine Tuning Your Audio SystemRoom Reflections Room Absorption for Home Theatre Systems Excessive USE of Absorptive MaterialsSlap Echoes Background Noise RattlesBackground Noise Solutions Standing Wave Solutions Speaker Placement Standing Wave Solutions Room RatiosStanding Waves Standing Wave Solutions Room Equalization Standing Wave Solutions AbsorptionFrom speaker Troubleshooting3dB Specifications

SYN 3 specifications

The JBL SYN 3 is a cutting-edge studio monitor that encapsulates the essence of professional audio engineering. Designed for musicians, producers, and audiophiles alike, this model combines advanced technology with superior sound quality, ensuring that every detail of your audio comes to life with clarity and precision.

One of the standout features of the JBL SYN 3 is its innovative three-way design. This configuration includes a high-frequency tweeter, a mid-range driver, and a robust woofer, allowing for a well-balanced frequency response that covers a broad spectrum of sounds. With a frequency range that reaches from 45 Hz to 24 kHz, the SYN 3 captures low thumping bass as easily as the delicate nuances of high notes, making it an ideal choice for a range of applications, from mixing and mastering to casual listening.

The SYN 3 utilizes JBL’s proprietary Image Control Waveguide technology. This engineering marvel enhances the stereo image, ensuring accurate spatial representation. Such precision in sound placement means that listeners can experience a more immersive audio environment, crucial for any sound mixing task where every detail counts.

In terms of power, the JBL SYN 3 is equipped with an impressive built-in amplifier system that offers substantial output while maintaining fidelity. With a total power output of 250 watts, this monitor can handle peaks without distortion, making it suitable for both quiet studio environments and louder setups. The rear ported design further optimizes bass response and minimizes unwanted resonances, allowing for accurate bass reproduction in any space.

Another key characteristic is the versatility of connection options. The SYN 3 features balanced XLR and TRS inputs, making it compatible with various audio interfaces and mixing consoles. This flexibility ensures that no matter the setup, integrating the SYN 3 into a sound system is seamless.

Durability and aesthetics have also not been overlooked; the speaker's enclosure is manufactured from high-quality materials designed to reduce resonance and provide a sleek and professional appearance. Available in a sleek black finish, it can easily blend into any studio decor.

Overall, the JBL SYN 3 is an exceptional tool for audio professionals, featuring advanced technology, ambitious design, and superior sound quality that can elevate any audio project. Its precision, power, and versatility make it a worthy addition to any studio setup, fulfilling the demands of contemporary music production while remaining true to JBL's legacy of excellence.
Top Page Image Contents