Hitachi CPS318W/CPX328W Operating the PC Screen, Available Functions Remote Control Operation

Page 25

OPERATING THE PC SCREEN

You can use the remote control as a simplified mouse or keyboard.

CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.

Only connect to a PC.

Before connecting, read the manuals of the device you will connect.

Do not unplug the connector cables while the computer is operating.

 

 

 

STANDBY/ON

VIDEO

RGB

SEARCH

 

ASPECT

 

AUTO

BLANK

MAGNIFY

HOME

PAGE UP

VOLUME

ON

 

 

 

 

END

PAGE DOWN

MUTE

OFF

 

 

 

FREEZE

 

KEYSTONE

POSITION

 

 

MENU

 

ENTER

 

PS/2, ADB, Serial Mouse Control

1.Turn off the projector and PC power, and connect the projector’s CONTROL terminal to the computer via the mouse cable.

2.If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the CONTROL terminal will not function.

3.Turn on the projector power, then the computer.

The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button).

Available Functions

Remote Control Operation

Move Pointer

Use

buttons

Left click with mouse

Press ENTER button

 

Right click with mouse

Press RESET button

 

ESC

RESET

USB Mouse/Keyboard Control

1.Connect the projector’s USB terminal to the computer using a USB cable. The functions in the table below can be controlled.

Available Functions

Remote Control Operation

 

 

 

Move Pointer

Use

buttons

 

 

 

Left click with mouse

Press ENTER button

 

 

 

 

Right click with mouse

Press RESET button

 

 

 

 

Press keyboard’s HOME key

Press HOME button

 

 

 

 

Press keyboard’s END key

Press END button

 

 

 

 

Press keyboard’s PAGE UP key

Press PAGE UP button

 

 

 

Press keyboard’s PAGE DOWN key

Press PAGE DOWN button

 

 

 

Press keyboard’s ESC key

Press ESC button

 

 

 

 

NOTES

It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g. track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

24

Image 25
Contents Manuale Distruzioni Vol.1 Informazioni di base CPS318W/CPX328WBrukerhåndbok Vol.1 Grunnleggende Contents Power cord Projector FeaturesSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapDevices you will be using to the projector Only use the power cord that came with the projectorPower cord Reference Part NamesFreeze button Keyboard buttons Auto button Blank button Volume button Mute buttonPosition button Cursor buttonsAdjusting the Projectors Elevator Feet Setting UP the ProjectorScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Putting batteries into the remote control unit Using the Remote ControlOperating the remote control Turning on the Power Selecting an Input Signal Turning OFF the Power Press the Volume button Adjusting the VolumePress Buttons to adjust Volume Temporarily Muting the SoundUse Buttons to adjust Position Adjusting the PositionPress the Position button Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureSelecting the Aspect Ratio Signal SearchingTemporarily Blanking the Screen Select a menu using Buttons Then press Or Enter button Using the Menu FunctionsSelect an item using Buttons, then press Or Enter button Press Buttons to adjust the levelOperating the PC Screen Available Functions Remote Control OperationLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Replacing the lamp Caring for the air filter AIR FilterReplacing the air filter Other Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Picture 2 Menu Picture 1 MenuPICTURE1 Menu PICTURE2 MenuInput Menu Input MenuAuto VideoScreen Menu Screen MenuBlank Start UPOption Menu VolumeOption Menu Auto OFFRelated Messages Power Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 Vol.2-6Dimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Regulatory Notices Hitachi Atago Building