Hitachi CPS225W user manual Troubleshooting, OSD Messages, Message Contents

Page 20

TROUBLESHOOTING

OSD Message

The messages as described below may appear on the screen at power ON. Take the appropriate measures when such messages appears.

Table 9. OSD Messages

Message

Contents

 

 

CHANGE THE LAMP

The usage time of lamp will be reaching 2000 hr

AFTER REPLACING LAMP,

shortly.(*2)

RESET THE LAMP TIME.

It is recommended to replace the lamp soon. Prepare a

(*1)

new lamp as a replacement.

 

 

 

The usage time of lamp will be reaching 2000 hr shortly.

CHANGE THE LAMP

It is recommended to replace the lamp within * *

AFTER REPLACING LAMP,

hours.(*2)

RESET THE LAMP TIME.

It might be happened that the lamp is cut off before * * hr

THE POWER WILL TURN OFF

by any chance. Power will be switched OFF

AFTER ** hr.

automatically in * * hours. Replace the lamp as shown in

(*1)

P.17~18 “Lamp”. Always reset the lamp timer after

 

replacing the lamp.

 

 

CHANGE THE LAMP

The usage time of lamp is about to reach. Power will be

AFTER REPLACING LAMP,

switched OFF in a few minutes.(*2)

RESET THE LAMP TIME.

Switch power OFF immediately and replace the lamp as

THE POWER WILL

shown in P.17 ~18 “Lamp”. Always reset the lamp timer

TURN OFF

after replacing the lamp.

AFTER 0 hr.

 

 

 

NO INPUT IS DETECTED

No input signal found.

ON ***

Check signal input connections and signal sources.

 

 

 

The horizontal or vertical frequency of the input signal is

SYNC IS OUT OF RANGE

not within the specified range.

ON ***

Check the specifications of the equipment and the signal

 

source.

 

 

NOTE (*1) This message is cleared automatically after approximately three minutes, and appears every time power is switched ON.

(*2) The unit has a function to turn the power off which will be active when the usage time reaches 2000 hr. However the life of lamp might be much different among lamps, so that it might be happened that a lamp is cut off before the function is active.

ENGLISH

ENGLISH-19

Image 20
Contents CPS225W Contents Before USE FeaturesContents of package Before USE Part NamesFront / Left View Rear / Right ViewRemote Controller Loading the BatteriesFirst Loading ReplacingInstallation Installation of the Projector and ScreenAngle Adjustment Installation ReferenceCabling InstallationCabling Plug & Play Power ConnectionExample of system setup Power on Power OFFOperations StandbyBasic Operation Description OperationsBasic Operation Set/Clear Mute Mode Press the Mute button Automatic Adjustment at RGB Input Press the Auto buttonAutomatic Adjustment at Video Input Press the Auto button Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuSelect Image Aspect Ratio Select Position of ImageInput Menu Input MenuSetup Initial Screen Display Select Turn on with Select Color TemperatureImage Menu Image Menu DescriptionOptions Menu Options Menu DescriptionSelect Menu Background Color Select with Select Menu Display Language Select withNo Signal Menu No Signal MenuSetup Initial Screen Display Select the Turn on with Select Blank Screen Color Select the color withMaintenance LampLamp Lamp LifeReplacing the Lamp MaintenanceResetting the Lamp Timer Air Filter Maintenance Other MaintenanceMaintenance Inside the Equipment Cleaning the LensTroubleshooting Message ContentsOSD Message OSD MessagesTroubleshooting Indicators MessageIndicators Message IndicatorSymptom Possible cause Remedy SymptomSymptom Specifications SpecificationsWarranty and AFTER-SERVICE Page Dimension Diagram Signal Connector Pin AssignmentSub 15-pin Shrink Connector RGB Mini Din 4-pin Connector S-VIDEOExample of computer signal TechnicalInitial set signals Connection to the Mouse Control Communications setting Command dataRS-232C communication ProtocolRequesting projector status Get command Changing the projector settings Set commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL For the Customers in Canada Pour les utilisateurs au Canada Regulatory NoticesFCC Statement Warning Hitachi
Related manuals
Manual 37 pages 39.97 Kb

CPS225W specifications

The Hitachi CPS225W is a high-performance portable air conditioner designed to meet the cooling needs of various environments, from homes to small offices. With its impressive combination of technology, energy efficiency, and user-friendly features, the CPS225W stands out in the crowded market of portable cooling solutions.

One of the most notable features of the Hitachi CPS225W is its cooling capacity. With a powerful 2.5 kW cooling output, it can efficiently cool spaces of up to 400 square feet, making it ideal for bedrooms, living rooms, or compact office spaces. The unit utilizes advanced inverter technology, which allows for precise temperature control and energy-efficient operation. This means that not only does the CPS225W provide rapid cooling, but it also consumes less electricity compared to conventional window or wall-mounted air conditioning systems.

Another key characteristic of the CPS225W is its user-friendly interface. It comes equipped with a remote control, enabling users to adjust settings from across the room with ease. The intuitive digital display offers options for setting the desired temperature, fan speed, and operating mode, whether cooling, dehumidifying, or fan only. Moreover, the air conditioner features a programmable timer, allowing users to schedule cooling cycles according to their routine, ensuring comfort without unnecessary energy expenditure.

The CPS225W also incorporates a high-efficiency air filter that effectively removes dust, allergens, and other particulates from the air, contributing to improved indoor air quality. The filter is washable and easy to maintain, ensuring that the air conditioner operates at peak performance throughout its lifespan.

In terms of design, the Hitachi CPS225W is compact and portable, featuring smooth-rolling casters that allow for easy relocation from room to room. The sleek white finish complements various interior styles, making it a versatile addition to any space.

Additionally, the CPS225W uses eco-friendly refrigerant, aligning with modern environmental standards and ensuring a lower carbon footprint. With its combination of powerful cooling, energy efficiency, and user-friendly features, the Hitachi CPS225W is an excellent choice for anyone seeking a reliable portable air conditioning solution. Whether for personal use or in a small workspace, this unit promises to deliver comfort and convenience with every use.