Hitachi CPS225W user manual Operations, Power on, Power OFF, Standby, Equipment is used safely

Page 9

OPERATIONS

STANDBY/ON Button

POWER Indicator

STANDBY/

ON Button

Zoom knob

Focus ring

Power Switch

Slide Lens door

 

STANDBY/ON

VIDEO RGB

KEYSTONE

MENU

SELECT

MENU POSITION RESET

MAGNIFY

FREEZE VOLUME

Power ON

1.Check that the power cord is connected correctly.

2.Set the power switch to [ ]. The standby mode is selected, and the POWER indicator is turned to orange.

3.Press the STANDBY/ON button on the control panel or the remote controller. Warm-up begins and the POWER indicator blinks in green.

4.The POWER indicator ceases blinking and turns to green when power is on. Open the slide lens door.

5.Adjust picture size using the Zoom knob.

6.Adjust focus using the Focus ring.

Power OFF

1.Press the STANDBY/ON button on the control panel or the remote controller. Then, the message "Power off?" will appear on the screen,and the message will disappear by any operation or no operation for 5 seconds.During this messsage indication,press the STANDBY/ON button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator blinks orange during lamp cooling. Pressing the STANDBY/ON button has no effect while the POWER indicator is blinking.

2.The system assumes the Standby mode when cooling is complete, and the POWER indicator ceases blinking and changes to orange. Check that the indicator is orange and set the Power switch to [O].

3.The POWER indicator is extinguished when power is off. Do not forget to close the lens door.

WARNING • Please read this manual, and the separate “SAFETY INSTRUCTIONS” thoroughly before using the equipment. Always ensure that

the equipment is used safely.

NOTE • Except in emergencies, do not turn off unless the POWER indicator is orange as it will reduce the life of the projector lamp.

•To prevent any troble, turn on/off the projector when the computer or video tape recorder is OFF. Providing a RS-232C cable is connected, turn on the computer before the projector.

•When a projector continues projecting the same image, the image may remain as an afterimage. Please do not project the image same for a long time.

ENGLISH-8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents CPS225W Contents Features Contents of packageBefore USE Part Names Before USEFront / Left View Rear / Right ViewLoading the Batteries Remote ControllerFirst Loading ReplacingInstallation of the Projector and Screen InstallationAngle Adjustment Installation ReferenceInstallation CablingCabling Power Connection Example of system setupPlug & Play Power OFF Power onOperations StandbyOperations Basic OperationBasic Operation Description Automatic Adjustment at RGB Input Press the Auto button Set/Clear Mute Mode Press the Mute buttonAutomatic Adjustment at Video Input Press the Auto button Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuSelect Image Aspect Ratio Select Position of ImageInput Menu Input MenuSelect Color Temperature Setup Initial Screen Display Select Turn on withImage Menu Image Menu DescriptionOptions Menu Description Options MenuSelect Menu Background Color Select with Select Menu Display Language Select withNo Signal Menu No Signal MenuSetup Initial Screen Display Select the Turn on with Select Blank Screen Color Select the color withLamp MaintenanceLamp Lamp LifeMaintenance Resetting the Lamp TimerReplacing the Lamp Other Maintenance Air Filter MaintenanceMaintenance Inside the Equipment Cleaning the LensMessage Contents TroubleshootingOSD Message OSD MessagesIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsWarranty and AFTER-SERVICE Page Signal Connector Pin Assignment Dimension DiagramSub 15-pin Shrink Connector RGB Mini Din 4-pin Connector S-VIDEOTechnical Example of computer signalInitial set signals Connection to the Mouse Control Command data Communications settingRS-232C communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL Regulatory Notices FCC Statement WarningFor the Customers in Canada Pour les utilisateurs au Canada Hitachi
Related manuals
Manual 37 pages 39.97 Kb

CPS225W specifications

The Hitachi CPS225W is a high-performance portable air conditioner designed to meet the cooling needs of various environments, from homes to small offices. With its impressive combination of technology, energy efficiency, and user-friendly features, the CPS225W stands out in the crowded market of portable cooling solutions.

One of the most notable features of the Hitachi CPS225W is its cooling capacity. With a powerful 2.5 kW cooling output, it can efficiently cool spaces of up to 400 square feet, making it ideal for bedrooms, living rooms, or compact office spaces. The unit utilizes advanced inverter technology, which allows for precise temperature control and energy-efficient operation. This means that not only does the CPS225W provide rapid cooling, but it also consumes less electricity compared to conventional window or wall-mounted air conditioning systems.

Another key characteristic of the CPS225W is its user-friendly interface. It comes equipped with a remote control, enabling users to adjust settings from across the room with ease. The intuitive digital display offers options for setting the desired temperature, fan speed, and operating mode, whether cooling, dehumidifying, or fan only. Moreover, the air conditioner features a programmable timer, allowing users to schedule cooling cycles according to their routine, ensuring comfort without unnecessary energy expenditure.

The CPS225W also incorporates a high-efficiency air filter that effectively removes dust, allergens, and other particulates from the air, contributing to improved indoor air quality. The filter is washable and easy to maintain, ensuring that the air conditioner operates at peak performance throughout its lifespan.

In terms of design, the Hitachi CPS225W is compact and portable, featuring smooth-rolling casters that allow for easy relocation from room to room. The sleek white finish complements various interior styles, making it a versatile addition to any space.

Additionally, the CPS225W uses eco-friendly refrigerant, aligning with modern environmental standards and ensuring a lower carbon footprint. With its combination of powerful cooling, energy efficiency, and user-friendly features, the Hitachi CPS225W is an excellent choice for anyone seeking a reliable portable air conditioning solution. Whether for personal use or in a small workspace, this unit promises to deliver comfort and convenience with every use.
Top Page Image Contents