Hitachi CP-X940W/E specifications Remote control transmitter

Page 10

Names and functions of each part (continued)

Remote control transmitter

STANDBY / ON button

Power ON/OFF button.

OFF sets the unit in standby mode. (See page 13, 14)

FREEZE Button

Pressing this button displays a still picture (by freezing). (See page 15)

MAGNIFY button

Pressing this button partially magnifies a displayed picture. (See page 15)

STANDBY/ON MUTE

FREEZE

MAGNIFY VOLUME

OFF

POSITION ON

LASER

MUTE button

Silences the sound. (Cancels the mute when the unit is set in mute mode.)

VOLUME button

Adjusts volume. The sound is loud or low while pressing the "+" or "-" button.

LASER button

Laser pointer ON button. Use as a stick (for indication). (See page 11)

MOUSE LEFT button

Mouse left button is the left click of the

POSITION button

Moves the picture by DISK PAD after pressed the POSITION ON button. (Only RGB signal input)

While the back light on, you can operate POSITION. *1

DISK PAD

1When the back light of MENU ON button

on, selects or adjusts the menu item. (See page 16)

2When removes the on-screen menus, works as mouse.

3When the back light of the POSITION ON button on, moves picture. *2

MENU ON button

Displays the on-screen menus.

And back light on. (See page 16 ~ 19) While the back light on, you can operate MENU.

BLANK ON button

1The blank screen which is displayed by pressing BLANK.

2And the blank screen will be revealed down by pressing BLANK again.

(See page 19)

RESETRIGHT

MENU ON MOUSE ON

BLANK TIMER

RGBVIDEO

INPUT

mouse. (bottom button) (See page 23)

RESET / RIGHT button

When displays the on-screen menus, resets the menu item to factory settings.

When operates the mouse emulation, works as right click of mouse in computer mode. (See page 23)

After moving the picture (POSITION ON), resets the position to factory settings.

MOUSE ON button

Mouse emulation mode starts. (See page 23)

When menu are open or blank screen is displayed or icon of position is displayed, there are stopped and back light off.

TIMER ON / OFF button

Displays the setting time by count down. See page 18 "TIMER" of menu when you set the minutes of timer.

INPUT SELECT button

Selects the input source. (See page 13)

*1 POSITION ON icon

When presses POSITION ON button, back light on and icon is displayed.

While displaying the icon, you can operate POSITION.

Icon is displaying in video mode, but can not operate POSITION.

*2

When the back light of MENU ON or POSITION ON button on without displaying the icon of POSITION ON or MENU, can operate DISK PAD too.

Displays the icon or MENU at the same time as starting the operation.

When presses the MOUSE ON button, MENU mode or POSITION ON mode is stopped.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Outline FeaturesContents Operating GuideFor the Customers in U.K Before use Video signal cablesPower cord Instructions to UsersDo not use power supplies other Than that specified Do not look directly at the lens when Lamp is litDo not install this unit in an unstable place If any abnormality occursDo not stare directly into the laser aperture Class 2 Laser ProductDo not step on this unit or do not put a Heavy object on it CleaningHandle the power cord carefully Do not block the ventilation holesVolume When you are not going to use For a long timeDo not place this unit where it gets hot Cleaning the lensContents of shipping box Names and functions of each partVideo input terminal Remote control sensor Main Power switchAC in socket RGB input terminalRemote control transmitter How to insert batteries Remove the battery compartment coverExample of the projector and screen installation InstallationHow to use foot adjusters To project the picture On indicator will light up orangeBasic operations For 3 secondsStandby mode To turn off the powerIndicator lights up orange PLUG&PLAYFreeze Function Magnifying FunctionMemory function Adjustments and functionsTo return to the initial setting On-screen menus are displayed on the screenAdjustment Item Details of adjustment Freeze Magnify SET UPHow to use the SET UP menu Operation is not possibleDuring AUTO-adjustment AUTO-adjustmentAUTO-adjustment Confirm Screen Adjustment Item Details of adjustmentImage The menu Image serves of the picture inversion MirrorConnection to the video signal terminals Connection to the RGB signal terminalExample of computer signal Resolution Standard Display Dots KHz TypeComputer/signal Vertical Timing lines Initial set signalsComputer/signal Horizontal Timing µs Horizontal Timing µsConnection to the control signal terminal Control signal terminalADB Mac mouse PS/2 mouseSerial mouse Communication Control command tableControl command table RS232C cable ReferenceControl data table Procedure of default setting the Projector status Procedure of getting the Projector statusProcedure of setting the Projector status Example of command errorAC Inlet Computer Note type Example of system setupConnecting various equipment ComputerDesk typeAir filter Filter cover Cleaning the air filterDo not use with removed air filter Loosen two screws and pull Handle to remove Remove the lamp coverLamp Lamp Install the lamp cover and fix it using screwsReset the lamp time Message tableIndicator display Blink in the following casesRCA Jack terminal Input terminal Input/Output Dimension diagramProduct name Liquid crystal projector Model name CP-X940W/E RCA Jack terminal Terminal

CP-X940W/E specifications

The Hitachi CP-X940W/E is a high-performance projector that stands out for its vibrant image quality, versatile features, and user-friendly design. This projector is particularly suited for educational and corporate environments, delivering clear and impactful presentations.

One of the flagship features of the CP-X940W/E is its impressive brightness level, reaching up to 4,000 lumens. This ensures that images remain sharp and vivid even in well-lit rooms, making it ideal for classrooms and conference halls. Additionally, the device has a contrast ratio of 10,000:1, which helps in producing deep blacks and bright whites, enhancing the overall picture quality. It supports a native WXGA resolution (1280 x 800), providing a great balance of detail and clarity for various content types.

The CP-X940W/E employs advanced 3LCD technology, which outshines typical DLP projectors by delivering more accurate colors and consistent brightness across its color spectrum. This technology significantly reduces color break-up and ensures smooth, natural color transitions, making it an excellent choice for showcasing high-definition content.

Connectivity is another strong point of the Hitachi CP-X940W/E. It features multiple input options, including HDMI, VGA, and USB ports, as well as support for wireless display technology. This versatility allows users to connect a wide range of devices from laptops to smartphones effortlessly. The projector also supports network control and monitoring, enabling IT managers to oversee multiple projectors in an organization with ease.

The projector is designed for longevity and ease of maintenance. It has a lamp life of up to 7,000 hours in eco mode, reducing the frequency of replacements and lowering overall operating costs. Its filter-free design means less maintenance hassle, contributing to a lower total cost of ownership.

Additionally, the Hitachi CP-X940W/E includes user-friendly features such as automatic keystone correction and a built-in speaker, simplifying setups and providing enough sound for small to medium-sized rooms. The projector also comes with a comprehensive remote control, enhancing convenience during presentations.

In summary, the Hitachi CP-X940W/E is a robust projector that combines advanced display technologies, flexible connectivity options, and user-centric features. It's an ideal choice for those looking to enhance their visual presentations, making it a trusted tool for education and business alike.
Top Page Image Contents