Hitachi CP-X935W Be careful in handling the power cord, Do not block the ventilation holes

Page 5
Pull out the power plug from the power outlet.

Warning

Be careful in handling the power cord.

∙Do not scratch, damage or process the power cord. Do not bend it forcibly. Also do not put a heavy object on it, do not heat it and do not pull it. If you do, the power cord may be damaged and it may cause a fire, electric shock, etc.

⋅Do not pull the cord.

⋅Do not put a heavy object on it.

⋅Do not damage the cord.

⋅Do not put it near a heating

device.

∙Be careful that this unit is not placed

on the power cord. The power cord may be damaged and it may cause a fire, electric shock, etc. If the cord is covered with a carpet, etc. a heavy object may be put on it without your realizing it.

∙If the cord is damaged (core wire is exposed, disconnected, etc.), ask

your dealer to replace it. It may cause a fire, electric shock, etc.

∙Check that no dirt adheres to the

power plug and fully insert without any play. If dirt adheres or the connection is incomplete, it may cause a fire, electric shock, etc.

∙The outer shield of power cord must be connected to ground.

If you do not, it may cause a electric shock.

ENGLISH

Caution

Do not step on this unit or do not put a

heavy object on it.

∙Do not step on this unit. Especially pay attention if children are present. If you do, the unit may fall over or may be broken causing an injury.

∙Do not put a heavy object on this unit. If you do, the unit may fall due to its imbalance or it may drop, causing an injury.

Do not block the ventilation holes.

Do not block the ventilation holes. If the ventilation holes are blocked, the heat inside may build up and it may cause a fire. Do not use this unit in the following ways: On its side. In a poorly ventilated, narrow place. On a carpet or bedspread. Covered with a tablecloth. Place this unit so that the ventilation holes are kept 50cm or more away from the wall.

Cleaning

Be sure to pull out the power plug

 

from the power outlet for safety

Pull out the power

when cleaning.

plug from the

power outlet.

Set the caster stoppers.

When this unit is installed on the table with casters, set the caster stoppers. If the table moves, it may fall over, causing an injury.

Do not place this unit in a moist or dusty place.

∙Do not place this unit in a moist or dusty place. It may cause a fire, electric shock, etc.

∙Do not place this unit where it would be exposed to soot or steam, near a cooking stove or humidifier, etc. It may cause a fire, electric shock, etc.

Handle the power cord carefully.

∙Do not bring the power cord near a heating device. The shield of the cord may melt and it may cause a fire, electric shock, etc.

∙Do not insert / disconnect the power plug with wet hands. It may cause an electric shock.

∙When the power plug is to be disconnected, do not pull the power cord. The power cord may be damaged and it may cause a fire, electric shock, etc. Be sure to hold the power plug.

Caution when carrying it.

When this unit is to be moved, apply a cover to the lens and be sure to disconnect the power plug from the power outlet and check that all external connection cords are removed before moving it. If not, the cord may be damaged and it may cause a fire, electric shock, etc.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Contents FeaturesOutline Operating GuideFor the Customers in U.K Power cord Video signal cablesBefore use Instructions to UsersDo not install this unit in an unstable place Do not look directly at the lens when Lamp is litDo not use power supplies other Than that specified If any abnormality occursCleaning Be careful in handling the power cordHandle the power cord carefully Do not step on this unit or do not put a Heavy object on itClean inside the unit at least once two years When you are not going to use For a long timeDo not place this unit where it gets hot VolumeNames and functions of each part Contents of shipping boxAC in socket Remote control sensor Main Power switchVideo input terminal RGB input terminalRemote control transmitter Remove the battery compartment cover How to insert batteriesHow to use foot adjusters InstallationExample of the projector and screen installation To project the picture Basic operationsIndicator lights up orange To turn off the powerStandby mode PLUG&PLAYMagnifying Function Freeze FunctionTo return to the initial setting Adjustments and functionsMemory function ∙ On-screen menus are displayed on the screenHow to use the SET UP menu SET UPAdjustment Item Details of adjustment Manual OperationDuring AUTO-adjustment Auto-adjustmentInput Auto Confirm ScreenOPT ImageMenu Image serves of the picture inversion Menu OPT. allows you to control communication function etcConnection to the RGB signal terminal Connection to the video signal terminalsResolution Standard Display Dots KHz Type Example of computer signalComputer/signal Vertical Timing lines Initial set signalsComputer/signal Horizontal Timing µs Control signal terminal Connection to the control signal terminalSerial mouse PS/2 mouseADB Mac mouse Control command table Control command tableCommunication RS232C cable ReferenceControl data table Connection to the control signal terminalProcedure of setting the Projector status Procedure of getting the Projector statusProcedure of default setting the Projector status Example of command errorConnecting various equipment Example of system setupAttach the air filter on the cover Cleaning the air filterRemove the lamp cover How to replace lampLoosen two screws and pull the handle to remove Lamp Option lamp Lamp unit CP-X935W/E DT00201Reset the lamp time Install the lamp cover and fix it using screwsLamp Message tableBlink in the following cases Indicator displayAll dimensions shown in inches Dimension diagram

CP-X935W specifications

The Hitachi CP-X935W is a versatile and powerful projector designed to meet the demands of both educational and business environments. With its cutting-edge technologies and a range of features, the CP-X935W stands out as an excellent choice for those seeking high-quality visuals and reliable performance.

One of the standout features of the CP-X935W is its impressive brightness rating of 3,300 ANSI lumens. This high level of brightness ensures that presentations and videos remain clear and visible even in well-lit rooms, making it an ideal projector for classrooms, conference rooms, and large venues. The projector also boasts a native WXGA resolution of 1280 x 800 pixels, allowing for crisp and detailed images that enhance the viewing experience.

The CP-X935W utilizes Hitachi's sophisticated DLP technology, which is known for delivering vibrant colors and sharp imagery. This technology minimizes the risk of image distortion and offers a high contrast ratio, which helps to produce deeper blacks and more vivid colors. The projector also features a 1.5x optical zoom lens, providing flexibility in placement without compromising image quality.

In terms of connectivity, the Hitachi CP-X935W offers a wide range of options. It includes HDMI, VGA, and USB ports, allowing users to easily connect laptops, Blu-ray players, and other multimedia devices. The inclusion of wireless presentation capability means that users can project content directly from their mobile devices without the need for cumbersome cables, enhancing the ease of use in dynamic presentation scenarios.

Additionally, the CP-X935W incorporates advanced lamp technology for improved longevity. The lamp life can reach up to 6,000 hours in eco mode, significantly reducing the total cost of ownership and maintenance. This feature is particularly advantageous for educational institutions and businesses with frequent projector use.

User-friendly features such as a remote control, intuitive on-screen menu, and quick start-up time further enhance the overall experience. The projector also supports various image adjustment features, including keystone correction and screen resizing, ensuring a perfect fit for any projection surface.

In conclusion, the Hitachi CP-X935W is a powerful projector that blends advanced technology with user-friendly features. Its high brightness, versatile connectivity options, and exceptional image quality make it a top choice for anyone looking to elevate their presentation experience. Whether in a classroom or a conference room, the CP-X935W is designed to deliver reliable performance and stunning visuals.
Top Page Image Contents