Hitachi CP-X870W user manual Turning on the Power, Selecting an Input Signal

Page 17

TURNING ON THE POWER (continued)

Selecting an Input Signal

5

Using the remote control

If selecting RGB input

Press the RGB button

Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2. Select the signal you wish to project.

• When BNC (RGB) is selected:

RGB

RGB BNC(RGB) DVI

•When BNC (COMPONENT) is selected:

RGB DVI

If selecting video input Press the VIDEO button

Press this button to toggle between the

VIDEO

devices connected to VIDEO IN, S-VIDEO

 

IN and COMPONENT VIDEO. As

 

illustrated below, each time you press the

 

VIDEO button, the projector switches between VIDEO IN, S-VIDEO IN and COMPONENT VIDEO. Select the signal you wish to project.

•When BNC (RGB) is selected:

VIDEO IN S-VIDEO IN COMPONENT VIDEO

•When BNC (COMPONENT) is selected:

VIDEO IN S-VIDEO IN COMPONENT VIDEO

BNC(COMPONENT)

Using the projector's control panel

Turn the INPUT dial

Turning the dial cycles

B INPUT

through the inputs as

 

shown below. Select the

 

terminal to which the signal

 

you want to project is input.

 

•When BNC (RGB) is selected:

RGB BNC(RGB) DVI

COMPONENT VIDEO S-VIDEO VIDEO

•When BNC (COMPONENT) is selected:

RGB BNC(COMPONENT) DVI

COMPONENT VIDEO S-VIDEO VIDEO

NOTE

Turn the INPUT dial and set it at the click point, otherwise input signal selection may be incorrect.

6

Use the ZOOM

/

buttons to adjust

ZOOM

 

 

 

 

the screen size

 

 

 

ZOOM

 

 

 

 

(Control panel)

(Remote control)

7

Use the FOCUS

/

buttons to adjust

FOCUS

 

 

 

 

the focus

 

 

 

FOCUS

 

 

 

 

(Control panel)

(Remote control)

16

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CP-X870W Contents RGB cable Video/Audio cable Vol.1/Vol.2 Safety Instructions Projector FeaturesSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapDevices you will be using to the projector Only use the power cord that came with the projectorProjector Part NamesRemote Control Adjusting the Projectors Elevator Feet Setting UP the ProjectorPress and hold in the elevator Buttons Turn the elevator screw to fine tuneTop view Side view Adjusting the Screen Size and Projection DistanceScreen Connecting Your Devices Function Projector Port Connection Cables Ports and CablesConnecting to a Computer Connecting Your DevicesA a a BNC Input DVI InputConnecting to a Display Monitor Connecting to a DVD PlayerConnecting to a VCR Putting batteries into the remote control unit Using the Remote ControlRemove the battery cover Close the battery coverOperating the remote control Using the Remote ControlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Selecting an Input Signal Turning on the PowerTurning OFF the Power Press the Volume button Adjusting the VolumeUse the lever switch / to adjust the volume Temporarily Muting the SoundPress the Position button Adjusting the PositionUse the , , , buttons to adjust the position Automatic Adjustment for RGB Input Using the Automatic Adjustment FeatureAutomatic Adjustment for Video Input Press the Auto buttonPress the Keystone button Correcting Keystone DistortionsAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionFreezing the Screen Using the Magnify FeatureWas begun When BNC RGB is selected Adjusting Screen with ONE-TOUCHPress the ONE Touch button You can activate the following functions just byTemporarily Blanking the Screen Selecting the Aspect RatioPress the Aspect button Press the Blank buttonPress the Menu button Using the Menu FunctionsUse the lever switch To adjust the level Operating the PC Screen Available Functions Remote Control OperationDo not use the projector with the lamp cover removed High Voltage High Temperature High PressureLamp Replacing the lamp LampCaring for the air filter AIR FilterReplacing the air filter AIR FilterOther Care Caring for the cabinet and remote control transmitterCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Main Menu Multifunctional SettingsMain Menu Item selectionPICTURE-2 Menu PICTURE-1 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuBlank Start UPOption Menu Wireless MenuOption Menu IR RemoteNo Input is Detected Related MessagesSync is OUT of Range Check the AIR FlowPower Lamp Temp Regarding the Indicator LampsVol.2-2 Phenomena That May Easily Be Mistaken for Machine DefectsVol.2-3 PhenomenonDimension Diagram SpecificationsSpecification Unit mmWarranty and AFTER-SERVICE Sub 15-pin Shrink Signal Connector PIN AssignmentSignal Terminal Specification Resolution FH kHz FV Hz Rating Signal mode Display Example of Computer SignalInitial SET Signals ADB Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseConsist of header 7 bytes + command data 6 bytes Command dataRS-232C Communication ProtocolRS-232C Communication 日本語 Command data chartBe EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Sales Europe GmbH Hitachi Europe GmbHHitachi Business Systems Nordic Hitachi France
Related manuals
Manual 2 pages 63.67 Kb

CP-X870W specifications

The Hitachi CP-X870W is a versatile and powerful projector designed for educational settings, corporate presentations, and large venues, delivering high-quality images with remarkable clarity and brightness. With a WUXGA resolution of 1920x1200 pixels, it ensures that visuals are sharp and detailed, making it suitable for displaying complex images, graphs, and videos seamlessly.

One of the standout features of the CP-X870W is its brightness, boasting a remarkable 8,000 ANSI lumens output. This high level of brightness is crucial for ensuring visibility even in well-lit environments, providing a clear and vivid display for audiences. The projector also utilizes a high contrast ratio, which enhances the depth and richness of the images, allowing users to appreciate the finer details in videos and presentations.

In terms of connectivity, the Hitachi CP-X870W is equipped with a variety of ports, including HDMI, VGA, and USB, making it easy to connect to various devices such as laptops, tablets, and media players. This flexibility caters to diverse user needs and simplifies the setup process during presentations.

The CP-X870W integrates advanced technologies to enhance the viewing experience further. It uses a 3LCD technology, which ensures that colors are accurately reproduced and prevents the issues of color break-up often associated with single-chip projectors. This leads to vibrant, lifelike images that captivate audiences.

Another notable characteristic is its eco-friendly design. The projector has an extended lamp life of up to 7,000 hours in eco mode, significantly reducing the frequency of lamp replacements and energy consumption. This not only benefits the environment but also lowers operational costs over time.

Additionally, the Hitachi CP-X870W features a user-friendly interface, making it easy for presenters to navigate settings and configurations. The inclusion of built-in speakers also allows for audio playback without the need for external speakers, streamlining the setup for various applications.

In summary, the Hitachi CP-X870W combines robust brightness, high resolution, and advanced technologies to deliver exceptional performance in educational and professional environments. Its flexible connectivity options, eco-friendly design, and user-oriented features make it a top choice for those seeking a reliable and efficient projector.
Top Page Image Contents