Hitachi CP-X870W Related Messages, No Input is Detected, Sync is OUT of Range, Check the AIR Flow

Page 40

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED

Related Messages

When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.

Message

Description

 

 

CLEAN THE AIR FILTER

A note of precaution when cleaning the air filter.

AFTER CLEANING AIR FILTER,

After cleaning the filter, operate FILTER TIME of the OPTION

RESET THE FILTER TIMER.

Menu ( 7 ), and perform reset of the filter timer.

 

 

NO INPUT IS DETECTED

There is no input signal.

Please confirm the signal input connection, and the status of the

ON ***

signal source.

 

 

 

SYNC IS OUT OF RANGE

The horizontal or vertical wavelength of the inputted signal is

outside of the response parameters of this unit. Please confirm

ON *** fH *****kHz fV *****Hz

the specs for this unit or the signal source specs.

 

 

 

The internal portion temperature is rising. Please turn the power

 

OFF, and allow the unit to cool down for approximately 20

 

minutes. After having confirmed the following items, then please

CHECK THE AIR FLOW

resent the power to ON.

 

• Is there blockage of the air passage aperture?

 

• Is the air filter dirty?

 

• Does the peripheral temperature exceed 35°C?

 

 

8

Image 40
Contents CP-X870W Contents Projector Features RGB cable Video/Audio cable Vol.1/Vol.2 Safety InstructionsSoft carrying case Remote control US Type UK Type Europe Type Projector With Lens CapOnly use the power cord that came with the projector Devices you will be using to the projectorPart Names ProjectorRemote Control Setting UP the Projector Adjusting the Projectors Elevator FeetPress and hold in the elevator Buttons Turn the elevator screw to fine tuneScreen Adjusting the Screen Size and Projection DistanceTop view Side view Connecting Your Devices Ports and Cables Function Projector Port Connection CablesConnecting Your Devices Connecting to a ComputerBNC Input DVI Input A a aConnecting to a VCR Connecting to a DVD PlayerConnecting to a Display Monitor Using the Remote Control Putting batteries into the remote control unitRemove the battery cover Close the battery coverUsing the Remote Control Operating the remote controlRemote control in an area free from obstacles Meters with a 40-degree rangeTurning on the Power Turning on the Power Selecting an Input SignalTurning OFF the Power Adjusting the Volume Press the Volume buttonUse the lever switch / to adjust the volume Temporarily Muting the SoundUse the , , , buttons to adjust the position Adjusting the PositionPress the Position button Using the Automatic Adjustment Feature Automatic Adjustment for RGB InputAutomatic Adjustment for Video Input Press the Auto buttonCorrecting Keystone Distortions Press the Keystone buttonAs illustrated on the right, a dialog will appear On the screen to aid you in correcting the distortionUsing the Magnify Feature Freezing the ScreenAdjusting Screen with ONE-TOUCH Was begun When BNC RGB is selectedPress the ONE Touch button You can activate the following functions just bySelecting the Aspect Ratio Temporarily Blanking the ScreenPress the Aspect button Press the Blank buttonUse the lever switch To adjust the level Using the Menu FunctionsPress the Menu button Available Functions Remote Control Operation Operating the PC ScreenLamp High Voltage High Temperature High PressureDo not use the projector with the lamp cover removed Lamp Replacing the lampAIR Filter Caring for the air filterAIR Filter Replacing the air filterCaring for the cabinet and remote control transmitter Other CareCaring for the inside of the projector Caring for the lensFor Technical see the end of this manual Multifunctional Settings Main MenuMain Menu Item selectionPICTURE-1 Menu PICTURE-2 MenuPICTURE-1 Menu PICTURE-2 MenuInput Menu Multifunctional SettingsInput Menu Auto Menu Auto MenuScreen Menu Screen MenuBlank Start UPWireless Menu Option MenuOption Menu IR RemoteRelated Messages No Input is DetectedSync is OUT of Range Check the AIR FlowRegarding the Indicator Lamps Power Lamp TempPhenomena That May Easily Be Mistaken for Machine Defects Vol.2-2Vol.2-3 PhenomenonSpecifications Dimension DiagramSpecification Unit mmWarranty and AFTER-SERVICE Signal Terminal Specification Signal Connector PIN AssignmentSub 15-pin Shrink Example of Computer Signal Resolution FH kHz FV Hz Rating Signal mode DisplayInitial SET Signals Connection to the Mouse Control ADB MouseUSB Mouse PS/2 MouseCommand data Consist of header 7 bytes + command data 6 bytesRS-232C Communication ProtocolRS-232C Communication Command data chart 日本語Be EF BA D2 Be EF AD D0 Be EF CB D0 Regulatory Notices Hitachi Europe GmbH Hitachi Sales Europe GmbHHitachi Business Systems Nordic Hitachi France
Related manuals
Manual 2 pages 63.67 Kb

CP-X870W specifications

The Hitachi CP-X870W is a versatile and powerful projector designed for educational settings, corporate presentations, and large venues, delivering high-quality images with remarkable clarity and brightness. With a WUXGA resolution of 1920x1200 pixels, it ensures that visuals are sharp and detailed, making it suitable for displaying complex images, graphs, and videos seamlessly.

One of the standout features of the CP-X870W is its brightness, boasting a remarkable 8,000 ANSI lumens output. This high level of brightness is crucial for ensuring visibility even in well-lit environments, providing a clear and vivid display for audiences. The projector also utilizes a high contrast ratio, which enhances the depth and richness of the images, allowing users to appreciate the finer details in videos and presentations.

In terms of connectivity, the Hitachi CP-X870W is equipped with a variety of ports, including HDMI, VGA, and USB, making it easy to connect to various devices such as laptops, tablets, and media players. This flexibility caters to diverse user needs and simplifies the setup process during presentations.

The CP-X870W integrates advanced technologies to enhance the viewing experience further. It uses a 3LCD technology, which ensures that colors are accurately reproduced and prevents the issues of color break-up often associated with single-chip projectors. This leads to vibrant, lifelike images that captivate audiences.

Another notable characteristic is its eco-friendly design. The projector has an extended lamp life of up to 7,000 hours in eco mode, significantly reducing the frequency of lamp replacements and energy consumption. This not only benefits the environment but also lowers operational costs over time.

Additionally, the Hitachi CP-X870W features a user-friendly interface, making it easy for presenters to navigate settings and configurations. The inclusion of built-in speakers also allows for audio playback without the need for external speakers, streamlining the setup for various applications.

In summary, the Hitachi CP-X870W combines robust brightness, high resolution, and advanced technologies to deliver exceptional performance in educational and professional environments. Its flexible connectivity options, eco-friendly design, and user-oriented features make it a top choice for those seeking a reliable and efficient projector.