Hitachi 8916 user manual Remote control, Putting batteries, About the remote control signal

Page 12
Holding the hook part of the battery cover, remove it.

Remote control

Remote control

Putting batteries

Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

1.

2. Align and insert the two AA batteries (HITACHI MAXELL, Part No.LR6 or R6P) according to their plus and minus terminals

as indicated in the remote control.

3. Replace the battery cover in the direction of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

•Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

•Make sure the plus and minus terminals are correctly aligned when loading a battery.

•Keep a battery away from children and pets.

•Do not recharge, short circuit, solder or disassemble a battery.

•Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

•If you observe battery leakage, wipe out the leakage and then replace a battery. If the leakage adheres to your body or clothes, rinse well with water immediately.

•Obey the local laws on disposing the battery.

About the remote control signal

The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active:

60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.

Approx.

3 m 30º 30º

NOTE • The remote control signal reflected in the screen or the like may be available. If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.

•The remote control uses infrared light to send signals to the projector (Class 1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control’s signal to the projector.

•The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Contents of package Fastening the lens coverPart names ProjectorHOT Control panel Rear panel &9Control port USB port Cb/Pb, Cr/Pr ports Video port Audio IN3 L,R ports 11 13 10Remote control Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Connecting your devices MonitorVCR/DVD PlayerConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotAC inlet Power cord Anti-theft chain or wire Security slot Security barRemote control About the remote control signalPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardMouse right button Press Reset button Mouse left button Press Enter buttonPower on/off Turning on the powerTurning off the power Adjusting the volume Selecting an input signalPress Mute button on the remote control OperatingSearching an input signal Selecting an input signal For a computer signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focusFocus ring Using the automatic adjustment feature Adjusting the position For a video signal and s-video signal  For a component video signalUsing the magnify feature Correcting the keystone distortionsFreezing the screen Temporarily blanking the screenFreeze button Blank buttonUsing the menu function ESC button Reset buttonEasy Menu Menu buttonUsing the menu function Advanced MenuAdvanced Menu Picture Mode AspectAuto KeystoneEasy Menu Picture menu GammaPicture menu Color TempLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemorySAVE-1, SAVE-2, SAVE-3, SAVE-4 For a computer signal For no signalImage menu Over ScanPhase Auto AdjustImage menu SizeInput menu ProgressiveVideo NR Color SpaceInput menu Video FormatFrame Lock Resolution For some pictures, this function may not work wellSetup menu Setup menu Standby ModeMonitor OUT Volume Audio menuSpeaker AudioUsing the /// buttons adjusts the menu position Screen menuBlank Screen menu Start UPMyScreen Capturing error has occurred. Please try again MyScreen registration is finishedMyScreen Lock MessageSource Name TemplateOption menu Auto SearchAuto on Option menu Auto OFFLamp Time Service MY ButtonMY Source Ghost Filter MessageFactory Reset KEY LockRemote Freq InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offDescription Security Registering the PIN CodeTurning Off the PIN Lock Function If you have forgotten your PIN CodeUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password function Writing the MY TextDisplaying the MY Text Description Turning on the MY Text Password Closed Caption menu DisplayMode ChannelMaintenance Replacing the lampType number 456-8755H Replacing the lamp Lamp coverLamp warning Replacing the lampCleaning and replacing the air filter Type number MU05611Cleaning and replacing the air filter Caring for the cabinet and remote control Other careInside of the projector Caring for the lensTroubleshooting Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedVolume is adjusted to an extremely low level AUDIO/SPEAKER setting is not correctMute function is working Lens cover is attachedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Whisper function is workingSpecifications Specifications916 Specifications 270100 112 Unit mm
Related manuals
Manual 16 pages 32.84 Kb

8916 specifications

Hitachi has long been recognized for its commitment to innovation and excellence in the field of industrial and communication technologies. One of their noteworthy products is the Hitachi 8916,8755H, a sophisticated and versatile piece of equipment designed for a variety of applications.

The Hitachi 8916,8755H is equipped with state-of-the-art features that enhance its performance and usability. One of its main characteristics is its robust processing power, which is driven by an advanced microcontroller that allows for efficient data processing and management. This capability ensures that the device can handle complex tasks with ease, making it suitable for demanding industrial environments.

In terms of connectivity, the Hitachi 8916,8755H incorporates a wide range of communication protocols. This flexibility allows it to seamlessly integrate with existing systems and networks, facilitating smooth data exchange and operational efficiency. Additionally, the device supports both wired and wireless communication, catering to diverse operational needs and environments.

One of the standout technologies of the Hitachi 8916,8755H is its intelligent monitoring and diagnostics system. This feature provides real-time insights into the status of the equipment, enabling users to proactively address issues before they escalate. The system’s predictive maintenance capabilities ensure that the device operates at peak performance, thereby extending its lifespan and reducing downtime.

Another significant characteristic of the Hitachi 8916,8755H is its user-friendly interface. The device is designed with an intuitive display and navigation system, making it accessible even for those with limited technical expertise. This focus on user experience simplifies the operation and configuration of the device, allowing teams to maximize productivity.

Safety is also paramount in the design of the Hitachi 8916,8755H. The device complies with international safety standards, incorporating features that protect both the equipment and its operators. Enhanced security measures safeguard sensitive data, ensuring that information remains confidential and tamper-proof.

In summary, the Hitachi 8916,8755H stands out for its powerful processing capabilities, versatile connectivity options, intelligent monitoring system, user-friendly interface, and robust safety features. This combination of attributes positions it as an ideal solution for a wide array of industrial and communication applications, making it a valuable asset for organizations seeking reliability and efficiency in their operations.
Top Page Image Contents