Hitachi 8916 user manual Source Name, Template

Page 39

SCREEN menu

SCREEN menu (continued)

Item

Description

 

Each input port for this projector can have a name applied to it.

 

(1) Use the ▲/▼ buttons on the SCREEN menu to

 

select SOURCE NAME and press the ► button.

 

The SOURCE NAME menu will be displayed.

 

(2) Use the ▲/▼ buttons on the SOURCE

 

NAME menu to select the port to be named

 

and press the ► button. Right side of the

 

menu is blank until a name is specified.

 

The SOURCE NAME dialog will be displayed.

 

(3) The current name will be displayed on the

 

first line. Use the ▲/▼/◄/► buttons and the

 

ENTER or INPUT button to select and enter

 

characters. The RESET button can be used

SOURCE NAME

to erase 1 character at a time. Also if you

move the cursor to DELETE or ALL CLEAR on

 

 

screen and push the ENTER or INPUT button,

 

1 character or all characters will be erased. The

 

name can be a maximum of 16 characters.

 

(4) To change an already inserted character,

 

press the ▲ button to move the cursor to the

 

first line, and use the ◄/► buttons to move

 

the cursor on the character to be changed.

 

After pressing the ENTER or INPUT button, the character is selected.

 

Then, follow the same procedure as described at the item (3) above.

 

(5) To finish entering text, move the cursor to the SAVE on screen

 

and press the ENTER or INPUT button. To revert to the previous

 

name without saving changes, move the cursor to the CANCEL on

 

screen and press the ENTER or INPUT button.

 

Using ▲/▼ buttons switches the mode for the template screen. The

 

selected template pattern can be displayed when the MY BUTTON

TEMPLATE

allocated to the TEMPLATE function is pressed (42).

DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2

 

 

 

TEST PATTERN ó DOT-LINE1

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Contents Fastening the lens cover Contents of packagePart names ProjectorHOT Cb/Pb, Cr/Pr ports Video port Audio IN3 L,R ports 11 13 10 Control panelRear panel &9 Control port USB portRemote control Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Player Connecting your devicesMonitor VCR/DVDAbout Plug-and-Play capability Connecting your devicesAnti-theft chain or wire Security slot Security bar Connecting power supplyUsing the security bar and slot AC inlet Power cordRemote control About the remote control signalPutting batteries Mouse left button Press Enter button Changing the frequency of remote control signalUsing as a simple PC mouse & keyboard Mouse right button Press Reset buttonPower on/off Turning on the powerTurning off the power Operating Adjusting the volumeSelecting an input signal Press Mute button on the remote control For no signal Searching an input signalSelecting an input signal  For a computer signalAdjusting the projectors elevator Adjusting the zoom and focusFocus ring  For a component video signal Using the automatic adjustment featureAdjusting the position  For a video signal and s-video signalCorrecting the keystone distortions Using the magnify featureBlank button Freezing the screenTemporarily blanking the screen Freeze buttonMenu button Using the menu functionESC button Reset button Easy MenuUsing the menu function Advanced MenuAdvanced Menu Keystone Picture ModeAspect AutoEasy Menu Gamma Picture menuColor Temp Picture menuLOAD-1, LOAD-2, LOAD-3, LOAD-4 MY MemorySAVE-1, SAVE-2, SAVE-3, SAVE-4 Over Scan For a computer signalFor no signal Image menuSize PhaseAuto Adjust Image menuColor Space Input menuProgressive Video NRInput menu Video FormatFrame Lock For some pictures, this function may not work well ResolutionSetup menu Setup menu Standby ModeMonitor OUT Audio VolumeAudio menu SpeakerUsing the /// buttons adjusts the menu position Screen menuBlank Screen menu Start UPMyScreen Message Capturing error has occurred. Please try againMyScreen registration is finished MyScreen LockTemplate Source NameOption menu Auto SearchAuto on Option menu Auto OFFLamp Time Service MY ButtonMY Source Filter Message GhostInformation Factory ResetKEY Lock Remote FreqSecurity Using Security FeaturesInputting the Password Changing the PasswordSetting the Password Using the MyScreen Password FunctionIf you have forgotten your Password Turning on the MyScreen Password FunctionRegistering the PIN Code Using the PIN Lock FunctionTurning the Password off Description SecurityIf you have forgotten your PIN Code Turning Off the PIN Lock FunctionUsing the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Using the MY Text Password function Writing the MY TextDisplaying the MY Text Description Turning on the MY Text Password Channel Closed Caption menuDisplay ModeLamp cover MaintenanceReplacing the lamp Type number 456-8755H Replacing the lampReplacing the lamp Lamp warningType number MU05611 Cleaning and replacing the air filterCleaning and replacing the air filter Caring for the lens Caring for the cabinet and remote controlOther care Inside of the projectorRelated messages TroubleshootingRegarding the indicator lamps Shutting the projector down Resetting all settingsInput changeover settings are mismatched Electrical power cord is not pluggedSignal cables are not correctly connected Signal source does not correctly workLens cover is attached Volume is adjusted to an extremely low levelAUDIO/SPEAKER setting is not correct Mute function is workingWhisper function is working Color settings are not correctly adjustedColor Space setting is not suitable Not properly adjustedSpecifications Specifications916 Specifications 270100 112 Unit mm
Related manuals
Manual 16 pages 32.84 Kb

8916 specifications

Hitachi has long been recognized for its commitment to innovation and excellence in the field of industrial and communication technologies. One of their noteworthy products is the Hitachi 8916,8755H, a sophisticated and versatile piece of equipment designed for a variety of applications.

The Hitachi 8916,8755H is equipped with state-of-the-art features that enhance its performance and usability. One of its main characteristics is its robust processing power, which is driven by an advanced microcontroller that allows for efficient data processing and management. This capability ensures that the device can handle complex tasks with ease, making it suitable for demanding industrial environments.

In terms of connectivity, the Hitachi 8916,8755H incorporates a wide range of communication protocols. This flexibility allows it to seamlessly integrate with existing systems and networks, facilitating smooth data exchange and operational efficiency. Additionally, the device supports both wired and wireless communication, catering to diverse operational needs and environments.

One of the standout technologies of the Hitachi 8916,8755H is its intelligent monitoring and diagnostics system. This feature provides real-time insights into the status of the equipment, enabling users to proactively address issues before they escalate. The system’s predictive maintenance capabilities ensure that the device operates at peak performance, thereby extending its lifespan and reducing downtime.

Another significant characteristic of the Hitachi 8916,8755H is its user-friendly interface. The device is designed with an intuitive display and navigation system, making it accessible even for those with limited technical expertise. This focus on user experience simplifies the operation and configuration of the device, allowing teams to maximize productivity.

Safety is also paramount in the design of the Hitachi 8916,8755H. The device complies with international safety standards, incorporating features that protect both the equipment and its operators. Enhanced security measures safeguard sensitive data, ensuring that information remains confidential and tamper-proof.

In summary, the Hitachi 8916,8755H stands out for its powerful processing capabilities, versatile connectivity options, intelligent monitoring system, user-friendly interface, and robust safety features. This combination of attributes positions it as an ideal solution for a wide array of industrial and communication applications, making it a valuable asset for organizations seeking reliability and efficiency in their operations.
Top Page Image Contents