JBL Guide to Connecting Your Speaker System for Optimal Performance
Page 7

CENTER AND SATELLITE SPEAKER CONNECTIONS

Turn Off All Power

After placing the speakers, you are ready to connect your system. First, turn off all audio-system power. Use high-quality speaker wire to make your connections (#18-gauge speaker wire with polarity coding is included). For longer distances, #16-gauge or heavier wire is recommended. The side of the wire with a ridge or other coding is usually considered positive (+) polarity. Also, consult the owner’s manuals that were included with your amplifier or receiver to confirm connection procedures.

Satellites

Observe polarities when making speaker connections, as shown in Figure 4. Connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on each speaker. Connect the – (black) terminals in the same way.

Important!

Do not reverse polarities (i.e., + to –, or – to +) when making connections. Doing so will cause poor imaging and diminished bass response. Be certain that positive and negative wire strands are completely isolated to avoid short circuits that may damage your equipment.

Figure 4. Wiring diagram shows polarity connections for one channel of a home theater system.

Center Channel

Observe polarities when making speaker connections, as shown in Figure 5. Connect each + terminal on the back of the amplifier or receiver to the respective + (red) terminal on the speaker. Connect the – (black) terminals in the same way.

Important!

Do not reverse polarities (i.e., + to –, or – to +) when making connections. Be certain that positive and negative wire strands are completely isolated to avoid short circuits that may damage your equipment.

NOTE: On certain models using hexagonal terminal nuts, a small socket wrench is provided to help in properly tightening the terminals. Hand-tighten only and do not overtighten.

Figure 5. The satellites and center channel speaker feature terminals that can be connected in several different ways – e.g., spade terminals and direct wiring (as shown here).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OWNER’S Guide Page Important Safety Instructions Included Thank YOU for Choosing JBLPlanning Your System Surround Channels PlacementLeft and Right Front Channels Center ChannelFixed-Mount Wall Bracket Adjustable Wall BracketWALL-MOUNTING the Satellites Center ChannelCenter and Satellite Speaker Connections Turn Off All Power SatellitesRear Panel Subwoofer ControlsSubwoofer Connections Operation CS6100 SpecificationsPage PRO Sound Comes Home

CS6100 specifications

The JBL CS6100 is a powerful and versatile home audio system designed to deliver an immersive sound experience for music enthusiasts and movie lovers alike. With a sleek design and cutting-edge technology, this speaker system embodies JBL's dedication to high-quality sound reproduction and user-friendly features.

One of the standout features of the JBL CS6100 is its impressive audio performance. The system includes a dedicated subwoofer that provides deep, resonant bass, enhancing the listening experience for any genre of music or film. This is complemented by a range of satellite speakers that deliver crisp and clear mid and high frequencies, ensuring that every sound is accurately reproduced. The overall output power of the CS6100 is optimized to fill larger rooms, offering an exceptional audio experience no matter the setting.

The CS6100 utilizes advanced audio technologies that set it apart from its competitors. JBL has implemented proprietary speaker driver designs that enhance overall sound quality and performance. This leads to a natural, balanced audio profile that is suitable for both critical listening and casual listening environments. Additionally, the system features advanced crossover technology which ensures seamless integration between the subwoofer and satellite speakers, allowing for a cohesive soundstage and better localization of sound effects during film playback.

Another advantageous characteristic of the JBL CS6100 is its connectivity options. The system supports multiple input types, including RCA and optical inputs, making it compatible with a wide range of devices such as televisions, Blu-ray players, and gaming consoles. This versatility ensures that users can easily connect their preferred audio sources, making the CS6100 a great addition to any home entertainment setup.

For those who value ease of use, the JBL CS6100 includes user-friendly controls and features such as remote control operation. This allows users to adjust the volume or switch inputs from the comfort of their seating area, enhancing overall convenience.

In conclusion, the JBL CS6100 is a robust home audio system that delivers a high-quality sound experience with its impressive features, advanced technologies, and user-friendly characteristics. It is an excellent choice for anyone looking to enhance their audio enjoyment, whether for music or movies, in a home setting.
Top Page Image Contents