NEC NP1150, NP3150 Click OK, Click Close, Click the X in the top-right corner of the window

Page 33

5.Setting the LAN Setting of Personal Computer ([Example] Wireless LAN of Windows Vista: Ad Hoc connection)

13Click [Use the following IP address], and input [IP address] and [Subnet mask].

•If, for example, the [IP address] and [Subnet mask] of the projector are set as show in “Example of settings for projector” on page 30, set the personal computer as shown below.

•Example of setting the IP address and subnet mask.

	Projector ( page 30)	Personal computer (Screen Below)

IP Address	192.168.100.10	192.168.100.30
Subnet Mask	255.255.255.0	255.255.255.0

13-1Click

13-2Click

Setting the LAN Setting of Personal Computer

14 Click

14Click [OK].

The “Wireless Network Connection Properties” window will be displayed.

15Click [Close].

The “Wireless Network Connection Status” window will be displayed.

16Click [Close].

The “Network and Sharing Center” window will be displayed.

17Click the [X] in the top-right corner of the window.

The window will close.

This Completes the Ad Hoc connection of wireless LAN on the personal computer (Windows Vista). Use each software program in User Supportware 5 to transmit the PC screen to the projector.

5

([Example] Wireless LAN of Windows Vista: Ad Hoc connection)

33

Image 33

Contents NP3150 / NP2150 / NP1150 Introduction Information on USB Wireless LANImportant Information USB Wireless LAN UnitUsage restrictions in North America Improper intrusions For United States, Canada, and Mexico SpecificationsFor other countries except United States, Canada and Mexico Contents What You Can Do with User Supportware Easy Connection function for connecting wireless LANImage Express Utility Simultaneous projection by multiple projectorsCentral management of the projecting personal computer Click switching of presenterDesktop Control Utility Start Slide Show Ulead Photo Explorer 8.0 SE BasicPC Control Utility Viewer PPT ConverterSupported the wireless LAN security type Operating EnvironmentSupported Projector CPU Operating EnvironmentConnecting LAN Cable Displaying On-Screen Menu Network Settings Setting the LAN Setting of ProjectorUse the button to select the Setup submenu Press the button Press the buttonSetting the LAN Setting of Projector Flow of Setting Wireless LANSetting Wireless LAN Display the Wireless page of Network SettingsSelect Profiles Input IP Address Set DhcpInput Subnet Mask Input DNS ConfigurationInput Gateway Select AdvancedInput or edit Ssid if necessary Select Ssid from Site Survey if necessarySelect Channel if necessary Select Network Type if necessarySelect KEY Select only when WEP is selected Select Security page if necessarySelect Security Type Ascii HEX Input KEY 1 to KEY 4 only when WEP is selectedFinalize the setting Finalize AdvancedReconnect the network Wired LAN Setting Wired LAN Display the Wired page of Network SettingsInput IP ADDRESS, Subnet MASK, and Gateway Click Windows Start → Control Panel Setting the LAN Setting of Personal ComputerClick Connect Click Connect to a networkClick the location suited for the application e.g., Work Click View statusClick Properties Click OK Click CloseClick the X in the top-right corner of the window Double-click the Network Connections Example Wireless LAN of Windows XP Ad Hoc connectionExample Wireless LAN of Windows XP Ad Hoc connection Click 1Click 2Click Setting the LAN Setting of Personal Computer Input WEP key to set up an encryption key and click Connect Click Viewing User’s Guide Refer to User’s Guide and HelpClick OK Menu will be displayed Using Help Displaying Helps other than Ulead Photo ExplorerClick in the following order Help Screen Layout Displaying Ulead Photo Explorer 8.0 HelpSecond edition October NEC Projector User Supportware

Related manuals

Manual 160 pages 56.4 Kb