NEC NP2150, NP1150 Select Ssid from Site Survey if necessary, Input or edit Ssid if necessary

4. Setting the LAN Setting of Projector

9Select SSID from “SITE SURVEY” (if necessary).

A list of SSID that can be connected to wireless LAN in this place are displayed, and the SSID that are to be connected are selected from this list. When SSID is selected from the list, the “SSID” field, “TYPE” field and “CHANNEL” field will also be automatically set.

<1> Press the SELECT button once to highlight “SITE SURVEY” and press the	button.
Searching SSID will begin.
When searching SSID is complete, a list of SSID is displayed.

Icon
............ Wireless access point		Personal computer (AD HOC)
........... WEP or WPA-PSK setting
<2> Use the SELECT /	button to highlight the SSID of the network to be connected.
Press the	button once to highlight [OK] and press the		button.

If the SSID to be connected is not on the list, press the EXIT button.

Note

To connect SSID for which WEP or WPA-PSK is set, the same setting must be made on the projector ( page 25).

10Input or edit “SSID” (if necessary).

SSID selected in “SITE SURVEY” are automatically input.

If the highlight is moved to the “SSID” field and the button is pressed, a software keyboard is displayed and characters can be input or edited.

The default setting of the projectors is “NECPJ”.

4

Setting the LAN Setting of Projector

23