NEC user manual Specifications, Model Number VT46 Optical

Page 29

SPECIFICATIONS

This section provides technical information about the VT46 Projector's performance.

Model Number

VT46

Optical

 

LCD Panel

0.7" p-Si TFT active-matrix

Resolution

800×600 pixels* native, up to UXGA with Advanced AccuBlend

Lens

Manual zoom and focus:

 

F1.7 - 2.0 f=21.6 - 25.9mm

Lamp

160 W

Image Size

21 - 300 inches (0.5 - 7.6 m) diagonal

Projection Distance

2.38 - 35.8 ft / 7.3 (Tele) - 10.9 m (Tele)

Projection Angle

Tele : 9.5° - 10.0° Wide : 11.3° - 11.8°

Keystone Correction

+/- 30 degrees electronic

Electrical

 

Inputs

1 RGB/Component (D-Sub 15 Pin), 1 S-Video (DIN 4 Pin), 1 Video (RCA),

 

1 Stereo Mini Audio, 2 (L/R) RCA Audio, 1 PC Control (DIN 8 Pin)

Video Compatibility

NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV: 1080i, 1080i/50Hz, 720p, 576p, 480p, 480i/

 

60Hz

Scan Rate

Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 50 Hz to 120 Hz

Video Bandwidth

RGB: 80 MHz (-3dB)

Color Reproduction

16.7 million colors simultaneously, Full color

Horizontal Resolution

NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines

 

SECAM: 350 TV lines

 

YCbCr: 800 TV lines

 

RGB: 800 dots (H)×600 dots (V)

External Control

RS232, IR

Sync Compatibility

Separate Sync / Composite Sync / Sync on G

Built-in Speaker

1W (monaural)

Power Requirement

100 - 120V AC / 200 - 240V AC, 50 / 60 Hz

Input Current

2.3A (100 - 120V AC) / 1.1A (200 - 240V AC)

Power Consumption

220W (7.5W in Standby mode)

Mechanical

 

Installation Orientation

Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear

Dimensions

12.2" (W)×3.5" (H)×9.1" (D)

 

310mm (W)×89mm (H)×230mm (D)

 

(not including protrusions)

Net Weight

6.5 lbs / 2.9 kg

Environmental Considerations

 

 

Operational Temperatures : 32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)

 

Storage Temperatures : 14° to 122°F (-10°to 50°C), 20% to 80% humidity (non-condensing)

Regulations

UL Approved (UL 60950, CSA 60950)

 

Meets DOC Canada Class B requirements

 

Meets FCC Class B requirements

 

Meets AS/NZS3548 Class B

 

Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)

 

Meets Low Voltage Directive (EN60950, TUV GS Approved)

For additional information visit:

US : http://www.necvisualsystems.com

Europe : http://www.nec-europe.com/

Global : http://www.nec-pj.com/

*Effective pixels are more than 99.99%.

The specifications are subject to change without notice.

E-29

Image 29
Contents VT46 Safety Cautions Whats in the Box? Fire and Shock PrecautionsLamp Replacement Table of Contents Introduction Features youll enjoyIntroduction to the Projector Congratulations on Your Purchase of The VT46 ProjectorPart Names of the Projector Top Features Terminal Panel Features Part Names of the Remote Control Operating Range for Wireless Remote Control Battery InstallationRemote Control Precautions Selecting a Location Installation and ConnectionsSetting Up the Screen and the Projector Do not attempt to install the projector yourself Distance ChartThrow Distance and Screen Size Reflecting the ImageTo connect Scart output RGB Connecting Your PC or Macintosh ComputerMaking Connections RGB Connecting Your DVD PlayerConnecting the Supplied Power Cable Connecting Your VCR or Laser Disc PlayerTurning on the Projector Projecting AN Image Basic OperationSelecting a Source Selecting the computer or video sourceAdjust the Tilt Foot Adjusting the Picture Size and PositionCorrecting the Vertical Keystone Distortion FocusAdjusting the Image Using Auto Adjust Turning Up or Down VolumeTurning off the Projector To turn off the projectorBasic Menu Operation Using ON-SCREEN MenuUsing the Menus List of Menu Items Menu Elements Image Menu Descriptions & FunctionsPicture Advanced SetupEnabling High Speed Fan Mode High Speed Fan Mode To disable the Security functionSelecting Signal Format Signal Select Page2 Enabling Power Management Power ManagementInformation DefaultTo replace the lamp MaintenanceReplacing the Lamp Cleaning or Replacing the Filter CleaningCleaning the Cabinet and the Lens To replace the filter spongePower Indicator TroubleshootingStatus Indicator Lamp IndicatorDoes not turn on Common Problems & Solutions Check These ItemsModel Number VT46 Optical SpecificationsPin Assignments of D-Sub RGB Input Connector Cabinet DimensionsMini D-Sub 15 Pin Connector Pin No RGB Signal Analog YCbCr SignalSXGA+ Compatible Input Signal ListCable Connection Communication Protocol PC Control CodesServices offered with TravelCare TravelCare a service for international travelersTerm of warranty TravelCare GuideAsia and Middle East Service are offeredApplication Sheet for TravelCare Service Program Condition of your TravelCare Service Program