NEC NP901W Setting a new program timer, Select a blank program number and press the Enter button

6. Using On-Screen Menu

Setting a new program timer

1.On the PROGRAM TIMER screen, use the SELECT  or H button to select [SETTINGS] and press the EN-

TER button.

The [PROGRAM LIST] screen will be displayed.

NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.

2. Select a blank program number and press the ENTER button.

The [EDIT] screen will be displayed.

3. Make settings for each item as required.

ACTIVE	Place a check mark to enable the program.
DAY	Select days of the week for the program timer. To execute the program from Monday to Friday, select
	[MON-FRI].To execute the program in everyday basis, select [EVERYDAY].
TIME	Set the time to execute the program. Enter time in 24-hour format.
FUNCTION	Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector by set-
	ting [ADVANCED SETTINGS]. Selecting [SOURCE] will allow you to select a video source by setting [AD-
	VANCED SETTINGS].
ADVANCED SETTINGS.. Select power on/off or a type of video source for the selected item in [FUNCTION].
REPEAT	Place a check mark to repeat the program continuing basis . To use the program this week only, clear the
	check mark.

91