NEC XG135LC, XG-1352G, XG85, XG-852G Specifications, Safety and regulation XG-1352/XG-852

Page 37

SPECIFICATIONS.

rojection type

Refraction type

 

Projector and screen are separated

Projection system

3 lens and 3 CRTs in-line

Scanning frequency

(XG-1352/XG-1352G)

 

H 15 to 135 kHz/V 40 to 160Hz

 

(XG-852/XG-852G)

 

H 15 to 85 kHz/V 40 to 160Hz

Retrace time

H 6.0 μS (fH 15 to 30kHz)

 

H 2.6 μS (fH 30 to 77kHz)

 

H 2.0 μS (fH 77 to 120kHz)

 

H 1.4 μS (fH 120 to 135kHz)

 

V 270 μS

Video bandwidth

150MHz (-3dB) XG-1352/XG-1352G

 

110MHz (-3dB) XG-852/XG-852G

CRT

8 inch liquid cooled

 

Deflection angle 90 degrees

Lens

Hybrid lens with ECP and ARC , F1.1

 

HD-134: XG-1352/XG-1352G

 

HD-144N: XG-852/XG-852G

 

(ECP: Enhanced Color Purity except B-lens/ARC:

 

Anti-Reflective Coating)

Picture size

60 to 300 inches diagonal

Resolution

1500TV lines at center (HDTV)

 

1350TV line at corner (HDTV)

Pixel resolution

2500×2000 dots (Addressable)

 

(XG-852/XG-852G: 1600×1200 dots )

Light output

240 ANSI lumens (XG-1352/XG-1352G, 230 ANSI

 

lumens (XG-852/XG-852G)

High voltage

32kV

Input

RGB signal 0.7Vp-p 75 ohm positive (BNC)

 

H/V sync 0.7 to 4.0Vp-p 75 ohm/High Z negative

 

or positive (BNC)

 

COMP sync 0.7 to 4.0Vp-p 75 ohm/High Z

 

negative or positive (BNC)

 

Sync on G 0.3 to 0.6Vp-p 75 ohm negative (BNC)

 

COMP Video 1.0Vp-p 75 ohm positive (BNC)

 

S-video: Y 1.0Vp-p 75 ohm positive

 

C 0.28Vp-p 75 ohm (burst level)

 

COMPONENT; 1.0Vp-p 75ohm negative (BNC)

 

Cr,Cb 0.7Vp-p 75ohm (BNC)

 

Video system NTSC, PAL, SECAM and NTSC4.43

Convergence

Digital convergence (Pre-set 100 positions)

 

Quick copy convergence

 

Static and wave convergence

 

Point convergence, Zone convergence

Convergence limits

Less than 0.2% of V-height

Warm up time

20 minutes

Setup signal

Cross hairs, Cross hatch, Dot, Window Pattern, H

 

test pattern

Power supply

AC 120V 60Hz (XG-1352/XG-852)

 

AC 220-240V 50Hz (XG-1352G/XG-852G)

Power consumption

750W (XG-1352), 690W (XG-852)

 

730W(XG-1352G), 660W (XG-852)

Input current ................. 6.7A

(AC 120V)XG-1352

6.2A

(AC 120V)XG-852

3.4A

(AC 220-240V)XG-1352G

3.1A

(AC 220-240V)XG-852G

Safety and regulation XG-1352/XG-852;

Meets FCC class A requirements UL Approved (UL 1950, CSA 950) DHHS Approved

Meets DOC (Canada) Meets RED ACT

XG-1352G/XG-852G;

Meets EMC Directive (EN55022,EN61000-3-2, EN61000-3-3, EN50082-1)

Meets Low Voltage Directive (EN60950, TÜV GS Approved)

PTB Approved

Cabinet dimensions ....... 610(W)X812(D)X325(H) mm

24.02(W)X31.97(D)X12.80(H) inch Weight ........................... 63.0 kg/139.0 lbs(XG-852/XG-852G)

67.4kg/148.7 lbs (XG-1352/XG-1352G)

Remote control .............. Wired application

Wireless (operating distance 7m/23ft.)

Remote control functions ..... User remote (RC-6320); Power ON/OFF, Input

signal select, Picture mute, Bright, Contrast, Color 1), Sharpness 1), Tint 2), Volume 3), Sound mute 3), Source information, Static convergence, Normal- ize, Enter, End, Closed Caption

Full function remote (RC-6321); Test, Display, Help, Information, Input list, Static focus, Edge focus, H/ V position, White balance select, Static conver- gence, Wave convergence, Point convergence, H/V amplitude, H/V linearity, H/V key-stone, H/V pin- cushion, H/V blanking, Tilt, Skew, H/V bow, Store, Normalize, Enter, End

Main control function .... Power ON/OFF, Input signal select,

External control ............. Power ON/OFF, Input signal select, Picture mute,

Sound mute3), Remote control data input PC control ..................... Acceptable

Supplied accessories ..... Full function remote control unit (RC-6321), User

remote control unit (RC-6320), Remote cable 16m/52ft., AC line cable, Terminal cover, Operation manual, Set-Up manual*, Installation manual*

Environment .................. Temperature 0 to 40 degrees C

Humidity 0 to 90% non-condensing Storage -10 to 50 degrees C

Sound emission ............. XG-1352/XG-852 less than 45dB

XG-1352G/XG-852G less than 70dB (A). Complies with ISO 3744 or ISO 7779

1)This works only for VIDEO signals.

2)This works only for NTSC video signals.

3)This works only with the Switcher operation.

Specifications are subject to change without notice. The dimensions given for the projector do not include protruding parts.

*Set-Up manual and Installation manual are not included

with XG-852G/XG-1352G.

12345 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Gsgv Acoustic Noise Information Ordinance Introduction FeaturesInstallation Important SafeguardsPower supply Cleaning12345 ContentsFront Terminal Panel Rear Control Panel Part Names and FunctionsPower Indicator Power Switch Main powerStandby Indicator RC Ready Indicator4SOUND Mute Button Remote control unitUser remote control RC-6320 Battery installation and replacementRemote control cautions Handling remote control and batteriesExamples of Connections When Used in Stand Alone OperationInput C Input B Input a When Used with One Switcher ISS-6020/ISS-6020GOption How to make connectionsISS-6020 Output to Setting of S8601 Set the DIP switch S8601 of the Switcher as followsMaster SlaveRemote 1 Terminal When used with the SwitcherPin No When used in stand alone operation Picture Projection Basic OperationTo project a picture source, proceed as follows Adjustment screen Displaying the Menu and Adjustment ScreensOperate menu Picture menuItems to select Storing Projector Settings Automatic Save FeatureList No When selecting NEWPicture Adjustment Position Adjustment A N K I N G A G E S I Z E + 1 0 %A S S R E B L E E R a T E I C T U R E O S I T I O NE R a T E I C T U R E O S I T I O N O U N D Input SelectionO U R C E I N F O T a T I C L O S E D C a P T I O N I M E R When using the projector with the ISS-6020/ISS-6020G When using the projector in stand alone operationSource Information L O S E D C a P T I O N I M E R Static Convergence AdjustmentA T I C T R + 1 0 % P T I O N X T Closed Caption Mode SelectionSetting Timer When making a new setting or selecting Edit Active --------- Enables ON/OFF Timer When selecting ClearInactive ------- Disables ON/OFF Timer When selecting ActiveMON 01/16/95 120000 Sleep TimerMute Normal, Load, and Cancel FunctionData Area for Output and Storage Adjustment AreaSearching Registered Signals N 0 1 / 1 6 / 9 0 0 0 1 S 0 Screen Format in Projecting a PictureSafety and regulation XG-1352/XG-852 SpecificationsNEC Corporation

XG135LC, XG-1352G, XG-852G, XG85, XG-1352 specifications

The NEC XG series projectors, including the XG-852, XG-1352, XG85, XG-852G, and XG-1352G, are renowned for their blend of high performance and reliability, catering to a wide range of professional presentation needs. These projectors are designed with advanced technologies to deliver exceptional image quality and versatility in various settings such as conference rooms, educational facilities, and large venues.

The NEC XG-852 features a brightness output of up to 4000 ANSI lumens, making it suitable for environments with ambient light. With a native resolution of XGA (1024x768), it provides clear and detailed images necessary for sharp visuals during presentations. The projector employs a 3LCD technology, which ensures high color accuracy and uniform brightness, reducing the chances of color degradation over time.

In contrast, the XG-1352 boasts an even higher brightness level of 5000 ANSI lumens, coupled with a native resolution of SXGA+ (1400x1050). This makes it an ideal choice for larger venues that require powerful projection capabilities. Enhanced features include a range of connectivity options such as HDMI, VGA, and USB, allowing seamless integration with various devices.

The XG85 acts as a compact yet powerful projector, featuring a brightness of 3500 ANSI lumens and a versatile set of inputs. It is designed for mobile professionals, boasting a lightweight build that makes transport easier without compromising on performance.

For those specifically looking for models with enhanced graphics capabilities, the XG-852G and XG-1352G incorporate advanced graphic technologies, which are designed for high-end presentations where image quality is paramount. These models include features like enhanced color management, which allows presenters to fine-tune colors for more engaging visuals.

Both the XG-852G and XG-1352G projectors come equipped with advanced filter systems that promote longevity and effective operation by keeping dust and other airborne particles at bay. The projectors are also designed for easy maintenance, with long lamp life that reduces the total cost of ownership significantly.

Overall, the NEC XG series stands out due to its robust build quality, superior image processing, and diverse connectivity options, making it a popular choice in professional environments that demand reliability and exceptional visual experiences.
Top Page Image Contents