PART NAMES AND FUNCTIONS
Remote control unit
POWER
ON OFF
1
4SOUND MUTE Button
Press to mute the sound. Press again to return the sound.
NOTE: This works only with the
2
3
4
5
6
7
OPERATE
PICTURE
MUTE
SOUND
MUTE
DISPLAY
STATIC
R
B
| 1 ABC | 2 DEF | 3 GHI | ||
|
|
|
|
|
|
| 4 JKL | 5 MNO | 6 PQR | ||
|
|
|
|
|
|
| 7 STU | 8 VWX | 9 YZ / | ||
|
|
|
|
|
|
|
|
| 10 ,. |
|
|
|
|
|
| CAPTION | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0
A
B
5DISPLAY Button
Press to turn on or off the
NOTE: Even if the
6STATIC Button
8 |
|
| CTL NORMAL ENTER |
| END |
| C | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| D |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
User Remote Control
NOTE: The full function remote control is designed for setup adjustment. Use the user remote control for normal operation.
1 POWER Buttons (ON/OFF)
Press the ON button to turn the projector on when the projector is in the standby condition (STANDBY and RC READY indicators lit). Press the OFF button to return the projector to the standby condition.
Press to enter the STATIC mode. You can adjust the static convergence.
7R and B Buttons
Turn each CRT beam on and off separately. When using with the CTL button, you can select the CRT to be adjusted during static convergence.
8CTL Button
Used in conjunction with other buttons, similar to a shift key on a computer.
9NORMAL Button
Returns the standard level for each signal. When pressed once, the confirmation message will be displayed. When “YES” is selected and ENTER is pressed, the data will be returned to the standard level. While holding down the CTL button, press the NORMAL button to display the “LOAD/CANCEL” menu to select either LOAD (last stored level) or CANCEL (data cancelled).
0INPUT Buttons
Select menus and switches input signals.
2 OPERATE Button | ACAPTION Button | |
Press to display the CLOSED CAPTION menu. | ||
Press to display the “OPERATE” menu. | ||
|
3 PICTURE MUTE Button
Press to mute the picture. Press again to display the picture. You can also mute the picture by holding down CTL and pressing PICTURE MUTE buttons. To restore the picture, holding down CTL and press PICTURE MUTE again. Or simply press END.
BCURSOR Buttons
Used for increasing and decreasing control levels, cursor movement and convergence adjustments.
CEND Button
Ends the adjustment mode.
NOTE: When the picture is muted by using CTL and PICTURE MUTE buttons, even if an input is switched to another or the power is turned off using the remote POWER OFF button, the mute cannot be canceled.
DENTER Button
Executes menu selection and switches to selected input.
8