NEC 456-01721-000 manual Cabinet Packaged for Shipping Tie-down Ramp

Page 6

Figure 1. Cabinet Packaged for Shipping

	Tie-down
Ramp	straps
Pallet

hsys032

The cardboard shipping container is secured to a shipping pallet by exterior shipping straps. (Inside the shipping container, interior shipping straps secure the cabinet to the pallet.) A ramp for rolling the cabinet off the pallet is attached to one side of the shipping container, at the rear of the cabinet. Labels on the cardboard cap indicate the front and rear of the cabinet.

-2-

Image 6

Contents Read Me First Unpacking Express5800/320Fc System Cabinets NEC Corporation of AmericaPage Contents Page Introduction Packaged CabinetCabinet Packaged for Shipping Tie-down Ramp Shows the dimensions of a packaged 38U cabinet Before Unpacking the CabinetDimensions of a Packaged 38U Cabinet Dimensions of a Packaged 24U Cabinet 56.5 Moving the Cabinet to the Installation Site Unpacking and Checking the Cabinet To unpack the cabinetTools Needed to Unpack the Cabinet Removing the Packing MaterialsCutting the Exterior Shipping Straps Remove the plastic wrap encasing the cabinet Removing the Interior Shipping Straps Wooden-Restraint Blocks Inserting the Lever Bar Tilting the Cabinet Removing the Cabinet from the Pallet Sliding Back the Wooden Restraint BlocksPosition the Pallet Ramp Checking the Cabinet and Systems Moving the Cabinet Down the Pallet RampVerifying the Express5800/320Fc Serial Number Stabilizing the Systems Stabilization GuidelinesDisposing of Shipping Materials What Happens Next?System Documentation Getting Help Online support from NEC Technical Support. You