NEC R320A-E4 Optical disk drive, KVM switch, Sample configuration, System Configuration Guide

Page 12
1internal connector

System Configuration Guide

NEC Express5800/R320a-E4/M4

USB

Interface

1internal connector

Optical disk drive

[Note]

-Writing function is not supported.

-Optical disk drive is not accessible after installing ft Server Control Software.

If you need to access the Optical disk drive, use the following command for temporary use.

# /opt/ft/sbin/enable-usb-storageUsing Optical disk drive is not recommended.Optical disk drive:

Slimline DVD-RAM drive included in the front panel as standard

KVM switch

[Note]

-ft Server must be connected to the master KVM switch when cascade connection.

-Be sure to apply PS/2 typed keyboard/Mouse to connect to KVM switch.

-Updating the keyboard information is required after the installation has been complete, because the operating system recognizes the keyboard as a 101 keyboard.

-Reconnect the cables or reset the KVM switch if the keyboard and mouse are out of function after CPU/IO module fail over.

USB

Interface

D-sub 15pin

Interface

Sample configuration

Switch unit connection cable set [K410-118(xx)]

Switch unit connection cable set [K410-119(xx)]

PS/2

Express5800/100 Series

Switch unit connection cable set [K410-119(xx)]

Master

Server Switch Unit Optical disk drive (8Port/USB) [N8191-10F]

Switch unit connection cable set [K410-119(1A)]

Slave

-Writing function is not supported. Server Switch Unit # /opt/ft/sbin/enable-usb-storage (8Port/USB) [N8191-10F]

LCD Monitor

Using Optical disk drive is not recommended. <Local procurement>

104Keyboard <Local procurement>

2 button w/ wheel mouse

[N8170-15]

Cascade connection of KVM switches is allowed up to two tiers.

PS/2

Express5800/100 Series

Product List

KVM switch:

N8191-10F

Server Switch Unit(8Server/USB)

1U or Desktop

Cables:

 

 

K410-118(1A)

Switch unit connection cable set

KVM unit – Server, USB, 1.8 m

K410-118(03)

Switch unit connection cable set

KVM unit – Server, USB, 3 m

K410-119(1A)

Switch unit connection cable set

KVM unit – Server, PS/2, 1.8 m

K410-119(03)

Swtich unit connection cable set

KVM unit – Server, PS/2, 3 m

K410-104A(03)

Display/Keyboard extension cable

KVM unit – Keyboard/Mouse, PS/2, 3 m

Keyboard/Mouse:

 

 

 

104Keyboard

PS/2

N8170-15

2 button w/ wheel mouse

PS/2

1st Edition August ’10

Page 10

Image 12
Contents SCG300-10-001 System Configuration GuideIT Network Global Solutions Division NEC Express5800/ft series1. System Configuration 2. Local Procurement 3. Hardware ListTable of Contents 2.1. Hardware/software components 2.2. Power cordSpecification Overview Quad-Core Intel Xeon Processor supported 4U Rackmount form factorVMware vSphere4 supported NEC Express5800/R320a-E4/M4 System Configuration GuideSystem Configuration Guide OutwardNEC Express5800/R320a-E4/M4 483R320a-E4 Quick configuration sheet R320a-M4 Quick configuration sheeet System Configuration GuideNEC Express5800/R320a-E4/M4Notes for configuring FT server with VMware 8. Backup server1. FT server main unit 2. VMware licenseFT server main unit NEC Express5800/R320a-E4/M4Processors MemoryProduct List A pair of Quad-Core Xeon Processor is installed as standardHard disk drives Server ManagementUp to 16 hard disk drives can be installed in the system 16 hot-swap drive baysLCD Monitor Input devicesFloppy disk drive Product ListKVM switch Sample configurationOptical disk drive Cascade connection of KVM switches is allowed up to two tiersServer Switch Unit 8 ports N8191-10F 17 inch LCD console unitK410-1181A 1.8m K410-11803 3m K410-11805 5m Consists of the following componentsTower conversion kit N8843-003 Tower conversion kitConfiguration Network LAN1000BASE-T 4 connectorVMware license The R320a VMware models support VMware vSphere 4 UpdateVMware vSphere 4 license for Small Business VMware vSphere 4 license for Medium and Large-sized BusinessConnection via Fiber Channel switch StorageDirect connection Fibre Channel controllerSupported PCI cards and installable slots R320a-E4R320a-M4 Non-Redundant configuration Redundant configuration2 connectors Power socketUPS When using Tower conversion kit Guest OS license VMware vSphere ClientCPU Memory Disk OS NIC Backup server NEC Storage management serverNEC ESMPRO Agent Dedicated server for data backup is recommended2.2 Power cord 2.1 Hardware/software components2. Local Procurement
Related manuals
Manual 22 pages 41.04 Kb