NEC LT180 manual Introduction

1. INTRODUCTION

7. MENU Button

Displays the menu for various settings and adjustments.

8.SELECT ￿￿￿￿ Button

￿￿: Use these buttons to select the menu of the item you wish to adjust.

￿￿: Use these buttons to change the level of a selected menu item.

9.ENTER Button

Use this button to enter your menu selection. It works the same as the ENTER button on the cabinet. See page E-4.

10. EXIT Button

It works the same as the EXIT button on the cabinet. See page E-4.

11.

MOUSE L-CLICK Button Not available on this model.

12.MOUSE R-CLICK Button Not available on this model.

13.VIDEO Button

Press this button to select a video source connected to the VIDEO input.

14. S-VIDEO Button

Press this button to select an S-Video source connected to the S-VIDEO input.

15. COMPUTER Button

Press this button to select a video source from computer or component equipment connected to your COM- PUTER IN port.

16. COMPONENT Button

Press this button to select a video source from component equipment connected to the COMPONENT input.

17. AUTO ADJ. Button

Use this button to adjust an RGB source for an optimal picture. See page E-26.

18. NOISE RED. Button

This button will turn on the noise reduction feature to reduce video noise.

19. VOLUME (+) (–) Button

Press (+) to increase the volume and (–) to decrease it.

20. ASPECT Button

Press this button once to display the Aspect Ratio select menu. Continue pressing to change aspect ratios. See page E-36.

21. PICTURE Button

Press this button to display the Picture menu. Each time this button is pressed, the option will be changed. See page E-34.

22. HELP Button

Provides the information about the status of the projector.

23. FREEZE Button

This button will freeze a picture. Press again to resume motion.

E-7