NEC LT180 manual Menu Descriptions & Functions, Picture, Adjustment

Page 41

5. USING ON-SCREEN MENU

Menu Descriptions & Functions

Picture

You can adjust brightness, contrast, sharpness, color, hue, noise reduction and Telecine.

NOTE: When one of Brightness, Contrast, Sharpness, Color or Hue is highlighted, pressing the ENTER button will display its slide bar for adjustment.

Brightness

Adjusts the brightness level or the black level of the image.

Contrast

Adjusts the intensity of the image according to the incoming signal (White level of the image).

Sharpness

Controls the detail of the image for Video.

Color

Increases or decreases the color saturation level (not valid for RGB).

Hue

Varies the color level from +/- green to +/-blue. The red level is used as reference. This

 

adjustment is only valid for Video and Component inputs (not valid for RGB).

Noise Reduction ....

Turn on or off the noise reduction feature. To reduce video noise, select On.

NOTE:

This feature is not available for 480p, 576p, 720p and non-1080i HDTV and RGB signals

Noise reduction set to off gives best image quality by way of higher bandwidth. Noise reduction set to on softens the image.

Telecine

Use 3:2 pull down correction to eliminate jitter and artifacts in video.

 

Auto: For film source such as a DVD player.

 

Off: For signals other than film sources.

 

 

 

NOTE: This feature is not available for 480p, 576p, 720p and non-1080i HDTV and RGB signals

Adjustment

You can adjust Wall Color, Color Management, Gamma Correction, Color Temperature and White Peaking.

Selecting Wall Color Correction Mode [Wall Color]

This function allows for quick adaptive color correction in applications where the screen material is not white. The following eight options are available: Off, Blackboard, Light yellow, Light green, Light blue, Sky blue, Light rose and Pink.

E-34

Image 41
Contents LT180 Precautions Safety CautionsImportant Information DOC Compliance NoticeRF Interference Important SafeguardsInstallation Iii Fire and Shock PrecautionsWhat’s in the Box? Lamp ReplacementTable of Contents Table of Contents Introduction Features you’ll enjoy on the LT180 projectorIntroduction to the Projector Congratulations on Your Purchase of The LT180 ProjectorIntroduction Part Names of the Projector Top Features Terminal Panel Features Part Names of the Remote Control Introduction Remote Control Precautions Battery InstallationOperating Range for Wireless Remote Control Installation and Connections Selecting a Location Setting Up the Screen and the ProjectorThrow Distance and Screen Size Distance ChartRear Projection Applications Making Connections Connecting Your PC or Macintosh ComputerADP-SC1 To connect Scart output RGBTo do so Connecting an External MonitorComponent Audio in OUT Connecting Your DVD PlayerVideo Connecting Your VCR or Laser Disc PlayerConnecting the Supplied Power Cable Turning on the Projector Cabinet controls Remote controlProjecting AN Image Basic Operation Cabinet controls Using the cabinet buttons Adjusting the Picture Size and PositionUsing the Remote Control Selecting a SourceUsing the Adjustable Rear Foot Zoom Adjusting the Tilt FootFocus Correcting the Vertical Keystone DistortionOptimizing an RGB Image Automatically Turning Up or Down VolumeAdjusting the Image Using Auto Adjust To turn off the projector Turning off the ProjectorAfter Use Turning Off the Image and Sound Convenient FeaturesFreezing a Picture Reducing Video Noise Noise ReductionGetting the Information on Lamp Usage and Projector Usage Using the Menus Using ON-SCREEN MenuFor Selecting items Solid triangle For Adjusting items Slide barFor Selecting items Return key symbol, Radio button List of Menu Items Selecting Wall Color Correction Mode Wall Color AdjustmentMenu Descriptions & Functions PictureImage Normal Cinema Native Selecting Aspect Ratio Aspect RatioSetup Selecting Projector Orientation Orientation AdvancedSelecting Communication Speed Communication Speed Preventing the Unauthorized use of the projector SecurityUsing ON-SCREEN Menu To disable the Security function Enabling Power Management Power Management Enabling Fan Speed Mode Fan ModeSelecting Signal Format Signal Select Disabling the Cabinet Buttons Cabinet ButtonInformation Returning to Factory Default Factory Default ResetCurrent Signal All DataReplacing the Lamp MaintenanceTo replace the lamp PreparationSelect Elect Push here Cleaning the Cabinet and the Lens Power Indicator Indicator Condition Projector Condition TroubleshootingStatus Indicator Lamp IndicatorDoes not turn on Common Problems & SolutionsProblem Check These Items Troubleshooting Electrical SpecificationsModel Number LT180 Optical Mechanical Appendix Cabinet DimensionsPin No RGB Signal Analog YCbCr Signal Pin Assignments of Computer in D-Sub RGB ConnectorMini D-Sub 15 Pin Connector PC Control Codes and Cable Connection PC Control Connector Mini DIN-8PPC Control codes Cable ConnectionSignal Compatible Input Signal ListPower Troubleshooting Check ListVideo and Audio OtherSignal cable Installation environmentComputer Video equipmentTravelCare Guide Repair servicesReplacement product rental service Oceania EuropeNorth America Asia and Middle East Huamark, Bangkapi, Bangkok 10240, Thailand Company & Name with signature Dear Sir s To NEC or NECs Authorized Service StationService Options Condition of your TravelCare Service ProgramWarranty Exclusions Charges for Warranty Exclusions and Out of Warranty CaseLoan Service Charges and Conditions