Epson MLC 104 IP Plus setup guide Power wiring

Page 11

Hardware Setup, cont’d

Both digital input and output modes of the digital I/O ports

have the ability to turn on an internal pull-up resistor to

+ 5 VDC (equivalent to SW2 on the previous illustration).

N Refer to the MLC 104 IP Plus User's Manual for further

details on configuring this port.

D MLS RS-232 connector — This port can control an optional

NPower the controller via an external power supply, not from an Extron switcher. The controller requires a separate 12 VDC power supply.

NCheck the power supply’s polarity before connecting it to the MLC. See the diagram below.

Extron switcher or other RS‑232 controllable device.

If you connect an optional switcher (such as an Extron

MLS Series switcher) to the MLC, you must connect a ground

wire between the switcher and the MLC, as shown in the

following diagram.

 

MLC/IR

MediaLink

 

A B C

Switcher's

 

 

 

 

Rear Panel

Smooth Ridges

A

A

SECTION A–A

 

 

Power Supply

 

Output Cord

Power wiring

GROUND +12V IN

PWR

12V

0.2” (5 mm) MAX.

MLC's

Power

Port

MLC/IR Port

NOTE You must connect a

 

 

ground wire

 

 

 

between the MLC

 

 

 

and MLS.

 

 

Ground ( )

 

 

 

B Receive (Rx)

Transmit (Tx)B

 

 

A Transmit (Tx)

Receive (Rx)A

 

 

 

Rx Tx

GROUND

 

 

A B

 

 

 

MLS

 

 

RS-232

 

 

MLC 104 IP Plus

 

 

Right Side Panel

E

PWR (power) connector — To provide power to the MLC,

 

connect a cable between this port and a 12 VDC, 1 amp

(maximum) power supply, as shown below. For power wiring instructions, see the diagram on the following page.

Ground ( ) +12 VDC input

An External

Power Supply

F

LAN connector and LEDs — An Ethernet connection can be

 

used on an ongoing basis to control the MLC 104 IP Plus (and

 

the devices connected to it) in an Ethernet network.

 

•

Use a straight-through cable for connection to a switch,

 

 

hub, or router.

 

•

Use a crossover cable for connection directly to a PC.

 

Configure the settings for this port via either SIS commands, an

 

embedded Web page, or Global Configurator.

 

LAN port defaults are as follows:

 

•

IP address: 192.168.254.254

 

• gateway IP address: 0.0.0.0

 

•

subnet mask: 255.255.0.0

 

•

DHCP: off

GROUND +12V IN

PWR

12V

MLC 104 IP Plus Right Side Panel

Ground all devices.

(12 VDC, 1 A max.)

Connecting an external power supply to an MLC 104 IP Plus

2-6

MLC 104 IP Plus • Hardware Setup

MLC 104 IP Plus • Hardware Setup

2-7

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MLC 104 IP Plus Precautions 安全须知 中文 Table of Contents One Table of Contents, cont’dAbout the MLC 104 IP Plus Medialink Controllers About Global ConfiguratorAbout this Manual Updating Firmware Installing the SoftwareIntroduction, cont’d System RequirementsTwo Display control RS-232 /IR port This port has dedicated Right Side Panel Features and ConnectionsAn equivalent digital I/O port circuit Hardware Setup, cont’dPower wiring IR learning range for the MLC 104 IP Plus Buttons Volume controlConfiguration host control port Pinout for TRS RS-232 cable wiringThree Download Device Drivers Software SetupAdd Device dialog box Basic Software Setup, cont’d Create a New ProjectProject Settings dialog box Add an MLC 104 IP Plus Controller and Define its LocationAdd Device dialog box Advanced Software Setup, cont’dDefining e-mail server settings Global Configurator Front Panel windowEmail Manager dialog box Contact Manager dialog box Setting up e-mail notificationsAdding e-mail contacts Contact Manager dialog boxAdd serial driver window Software Setup, cont’d Add a Serial and an IR DeviceDownloading additional drivers Adding a serial driverAdd IR driver window Configure the Front Panel ButtonsFront Panel window with configured buttons Adding an IR driverEpson PowerLite 7700p projector icon. a list of operations Configuring an input buttonConfiguring the On and Off buttons Configure the Control Modules Using the Auto Fill FeatureFrom the Auto Fill Dual-Function DVD and VCR IR Control module configurationControl module main window Input 2 button selectionScheduled Actions Wizard Software Setup, cont’d Create a Display Shutdown ScheduleDisplay shutdown action selection dialog Display lamp hour e-mail notification Monitored Conditions Wizard dialogBuild menu Build and Upload a ConfigurationBuilding a configuration Uploading a configurationGlobalViewer main Accessing GlobalViewer

MLC 104 IP Plus specifications

The Epson MLC 104 IP Plus is a versatile and innovative printing solution designed to meet the needs of both businesses and individual users. This model stands out for its exceptional performance, reliability, and advanced features, making it an ideal choice for a variety of printing applications.

One of the main features of the Epson MLC 104 IP Plus is its high-speed printing capability. With print speeds of up to 35 pages per minute, users can efficiently produce large volumes of documents without compromising quality. The printer utilizes PrecisionCore technology, which is Epson's proprietary printing technology that enhances speed and quality. This technology allows for precise ink placement, resulting in sharp text and vibrant images.

The Epson MLC 104 IP Plus also supports a variety of media types and sizes, including envelopes, labels, and various paper types, making it a flexible choice for different printing needs. It can handle paper sizes ranging from A6 to A4, allowing users to print everything from small labels to large reports.

Another key characteristic of this printer is its energy efficiency. The Epson MLC 104 IP Plus is designed to consume less power compared to traditional laser printers, making it an environmentally friendly option. Additionally, it features an automatic duplex printing function, which helps save paper and reduce waste.

Connectivity is another strong suit of the MLC 104 IP Plus. It offers multiple connectivity options, including USB, Ethernet, and wireless networking capabilities. This allows users to easily connect the printer to various devices, such as computers, smartphones, and tablets, streamlining the printing process. The included mobile printing solutions, such as Epson Email Print and the Epson iPrint app, make it even easier to print documents directly from mobile devices.

The Epson MLC 104 IP Plus is accompanied by a user-friendly interface, featuring a clear LCD screen that simplifies navigation through settings and options. This ease of use is complemented by low maintenance requirements, making it suitable for busy environments.

In summary, the Epson MLC 104 IP Plus combines high-speed printing, versatile media handling, energy efficiency, and robust connectivity options. With its PrecisionCore technology and user-friendly design, this printer is an excellent choice for those seeking a reliable and efficient printing solution. Whether for a home office or a larger business operation, the MLC 104 IP Plus delivers quality and performance that meets the demands of modern printing.
Top Page Image Contents