Epson MLC 104 IP Plus setup guide Software Setup, cont’d Create a Display Shutdown Schedule

Software Setup, cont’d

Step 8: Create a Display Shutdown Schedule

Global Configurator’s (GC) scheduling feature enables you to schedule actions and events for a selected device. Scheduling is often useful for setting a projector or other device to shut down or turn on at a predetermined time (e.g., in a school, all projectors can be set to power off at 5:00 P.M.).

To schedule a display shutdown:

1.	Click on the Schedule tab in the Global Configurator
	window.
2.	Click the Add Schedule button below the Scheduled
	Actions window. The Scheduled Actions Wizard dialog
	box appears, as shown below.

3.	Enter a name (Shutdown) in the Enter Scheduled Action
	Name field.
4.	Indicate the time for the desired action and uncheck
	inactive times (weekend hours when staff are away, for
	example).
	For events that occur at the same time daily, change the
	time alongside the Set All button. Click the Set All button
	to automatically change all the days of the week.
5.	Click Next. This takes you to the actions page, where you
	can specify the action.

		Display shutdown action selection dialog
	6.	Select the device to be scheduled (for our purposes,
		choose the Epson PowerLite 7700p) from the Subject Port
		window.
Scheduled Actions Wizard	7.	Select the action Power Control-Offfrom the Available
		Options window, then click the Apply Action button.
	8.	Click Done. The dialog box closes.

3-18 MLC 104 IP Plus • Software Setup MLC 104 IP Plus • Software Setup 3-19