Place the bottles to the left of the printer as shown.
NEVER PLACE THE BOTTLES
HIGHER THAN THIS
(If the bottles are placed higher then the ink may siphon into the bottom of the printer.)
Make sure there are no twists in the tubing.
Feed the cartridges through the opening in the printhead lid. (If you have previously removed this lid already do not worry as it is not necessary for the operation of the system).
Push the cartridges down firmly until they snap into position. Close the printhead lid making sure not to trap the tubing.
Remove the tape from the sticky pad and firmly press the tube support into place as shown Make sure the tubing is not twisted..
6