Philips DR500 manual Troubleshooting Tips, Problem Possible Causes Solutions

Page 41

Troubleshooting Tips

The troubleshooting tips found on the following pages were designed to help you diagnose and correct minor problems in the unlikely event that you experience difficulties with your DBS DR500 system. Possible problems, arranged alphabetically, are followed by solutions that should help you to troubleshoot any DBS DR500 difficulties.

If you try all the suggested solutions and nothing works, call your DMX affiliate, as they are equipped to diagnose and correct your DBS system and DR500 Receiver problems.

Problem

Possible Causes

Solutions

 

 

 

Authorized indicator is

You are not authorized to receive the current

Tune to an authorized channel. Contact

NOT lit green

channel.

your DMX affiliate if you wish to receive

 

 

the music channel.

DR500 Receiver does

DR500 is not plugged in.

Check that the DR500 is plugged into an

not work

 

AC power outlet.

 

The AC outlet is off.

Turn the AC outlet on.

 

The AC outlet is not working.

Switch the DR500 power cord to another

 

 

outlet. Have a professional electrician

 

 

check the outlet.

 

The AC outlet is not providing the required

Operate the DR500 from a 120 V, 60 Hz

 

power. (You may be experiencing a power

outlet only. Have a professional electrician

 

brown out in your area.)

check the outlet.

 

The DBS system is not correctly installed, the

Check the DBS system for proper

 

satellite dish antenna is not pointed at the

operation and that the satellite dish is in

 

satellite.

the correct position (refer to Section 1).

 

 

 

DR500 Receiver

The DR500 may need to be serviced.

Unplug the receiver from the wall outlet.

shows a distinct

 

Wait 30 seconds. Plug the DR500 back

change in operation or

 

into the outlet. Check the DR500’s

is not operating

 

performance. If the DR500 still performs

normally

 

poorly, contact your DMX affiliate.

 

 

 

LNB PWR Indicator

The cable connecting the DR500 to the satellite

Disconnect the cable from the unit and

Flashing

dish is shorted.

wait 30 seconds. If the Fault light turns

 

 

off, replace the cable. If the Fault light

 

 

flashes, contact your DMX affiliate.

 

There is a problem with the satellite dish LNB.

Contact your DMX affiliate.

 

 

 

Music stops briefly or

The audio signal for the particular music

Select another music channel or wait for

is distorted

channel was temporarily interrupted by a

the music to begin again.

 

technical problem.

 

 

Poor satellite signal quality sometimes due to

Wait for the music to begin again. If this is

 

sunspots or inclement weather.

a frequently re-occuring problem, contact

 

 

your DMX affiliate.

 

The DR500 was subjected to excessive

Ensure that the DR500 is in an appropriate

 

vibration or movement.

location away from vibration or movement

 

 

that may cause the music to stop

 

 

momentarily.

 

 

 

 

 

DR500 (E-41)

 

 

Rev. C 10/94

Image 41
Contents Digital Audio Satellite Receiver DR500 User Guide Copyright 1999 Digital Music Express Risk of Electric Shock Table of Contents Advanced Operations Getting Started and Basic OperationsAppendix B DR500 Reference Sheet Maintenance and TroubleshootingSpecifications Appendix a Warranty and Repair Information Getting Started Important InformationDR500 E-8 Rev. C 10/94 Scan DR500 ReferenceView DR500 E-11 Rev. C 10/94 What is DMX MUSIC? System FeaturesDBS System Overview DR500 E-14 Rev. C 10/94 DR500 Digital Audio Satellite Receiver DR500 System ComponentsDR500 Back Panel DMR Remote Control Units DMR-22 Remote Control DMR-28 DMX/DJ Remote Control Additional DR500 Receivers Before You Begin DR500 Shipment Checklist Choosing a Good Location Safety PrecautionsConnection Guidelines Connecting the DR500 to Your Audio SystemConnecting the DR500 to Your Stereo System If the Audio Equipment Has a Direct Digital Coaxial Input Connecting the DR500 to Your Monaural SystemAntenna Installation and Alignment Recommended Equipment Connecting Multiple Receivers to One AntennaSection Topics Checking Forced Tune Events Setting Forced Tune EventsForced Tune Events    Clearing Forced Tune EventsAdding Authorized Channels Local Channel ManagementDeleting Authorized Channels Setting the Dynamic Range Clearing the Dynamic Range Checking Dynamic Range SettingsSetting the Dynamic Range Global Default Setting the Transponder Frequency Checking the Transponder Frequency Checking Signal Quality12 dB Front Panel Lockout Setting the Front Panel LockoutDMX/DJ Functions Clearing the Front Panel LockoutMore Checking the DR500’s StatusCleaning the DR500 Receiver MaintenanceProblem Possible Causes Solutions Troubleshooting TipsDMX/DJ Remote control Audio Specifications Warranty Statement Return Procedures  DMX Affiliates Appendix C Technical Installation Information

DR500 specifications

The Philips DR500 is a cutting-edge digital radiography system designed to enhance imaging performance while ensuring a streamlined workflow and patient comfort. With a robust set of features, the DR500 combines advanced technologies to meet the needs of modern medical facilities.

One of the primary features of the Philips DR500 is its innovative detector technology. It is equipped with a high-resolution flat-panel detector that delivers exceptional image quality with minimal radiation exposure. This is crucial for patient safety while allowing healthcare professionals to achieve accurate diagnoses. The detector's fast image acquisition speeds mean that examinations can be completed more swiftly, enhancing overall operational efficiency.

The DR500 also boasts a user-friendly interface that simplifies the imaging process for radiologists and technicians alike. The touchscreen interface is intuitive, allowing for quick adjustments and settings configuration. This ease of use is complemented by automated features that reduce the likelihood of human error and improve consistency in results.

Another significant characteristic of the Philips DR500 is its versatile imaging capabilities. The system supports various radiographic applications, from general radiography to specialized procedures. This versatility makes it a valuable addition to hospitals and clinics that require a wide range of imaging modalities. It proficiently handles different patient demographics, including pediatrics and geriatrics, adapting to their unique needs.

Connectivity is a hallmark of modern imaging systems, and the DR500 excels in this area. With advanced networking capabilities, it seamlessly integrates with existing Picture Archiving and Communication Systems (PACS) and electronic health records (EHRs). This ensures that images can be stored, retrieved, and shared effortlessly among healthcare providers, improving collaboration and enabling quicker clinical decision-making.

Moreover, the Philips DR500 prioritizes patient comfort. Its ergonomic design allows for easy access and positioning, making the imaging process less stressful for patients. Enhanced features such as auto-positioning and customizable protocols contribute to a smoother experience, fostering a patient-centric approach in diagnostic imaging.

In summary, the Philips DR500 represents a significant advancement in digital radiography. Its combination of high-quality imaging, user-friendly operation, and integrated connectivity positions it as a preferred choice for healthcare facilities aiming to improve diagnostic accuracy and patient care. With its adaptable design and advanced technologies, the DR500 stands out as a powerful tool for today's medical imaging needs.