Philips DR500 manual Dmx/Dj

Page 42

Problem

Possible Causes

Solutions

 

 

 

No sound

The stereo is turned off or the volume is turned

Turn on the stereo and adjust the volume.

 

down.

 

 

The DR500 Receiver volume is turned down.

Turn the volume up on the DR500

 

 

Receiver.

 

The Mute function is selected.

To return to normal volume, press MUTE

 

 

on your remote control.

 

You are not authorized to receive the current

Tune to an authorized channel (refer to

 

channel.

Section 3). Contact your DMX affiliate if

 

 

you wish to receive the music channel.

 

The DR500 and stereo connectors are not

Check all DR500 and stereo connections.

 

correctly attached.

 

 

 

 

No sound from one

Balance is incorrectly set or stereo/speaker

Adjust the balance controls on your stereo

speaker

connections are not correctly adjusted.

and check all connectors.

 

 

 

Remote control does

The remote control is not pointed at the

Point the remote control directly at the

not operate the DR500

DR500.

DR500. Ensure that there are no obstacles

 

 

between the DR500 and the remote control

 

 

unit.

 

The remote control is too far from the DR500.

Move to within 10 meters of the DR500.

 

The path between the DR500 and remote

Remove the obstruction, point the remote

 

control is obstructed.

control directly at the DR500.

 

The DMX/DJ mode is not set to the correct

Ensure that the DMX/DJ mode is set

 

mode.

correctly. You will see DMX appear on

 

 

the DMX/DJ display (refer to Section 1).

 

Front panel lockout is set.

Unlock the front panel (refer to Section 4).

 

The remote control batteries are run down.

Replace all remote control batteries.

 

Remote control is broken.

Check that the remote control is

 

 

functioning properly by performing the

 

 

procedure for viewing the time on the

 

 

DMX/DJ.

 

 

 

DR500 (E-42)

Rev. C 10/94

Image 42
Contents Digital Audio Satellite Receiver DR500 User Guide Copyright 1999 Digital Music Express Risk of Electric Shock Table of Contents Getting Started and Basic Operations Advanced OperationsMaintenance and Troubleshooting Specifications Appendix a Warranty and Repair InformationAppendix B DR500 Reference Sheet Important Information Getting StartedDR500 E-8 Rev. C 10/94 DR500 Reference ScanView DR500 E-11 Rev. C 10/94 System Features What is DMX MUSIC?DBS System Overview DR500 E-14 Rev. C 10/94 DR500 System Components DR500 Digital Audio Satellite ReceiverDR500 Back Panel DMR Remote Control Units DMR-22 Remote Control DMR-28 DMX/DJ Remote Control Additional DR500 Receivers Before You Begin DR500 Shipment Checklist Safety Precautions Choosing a Good LocationConnecting the DR500 to Your Audio System Connection GuidelinesConnecting the DR500 to Your Stereo System Connecting the DR500 to Your Monaural System If the Audio Equipment Has a Direct Digital Coaxial InputAntenna Installation and Alignment Connecting Multiple Receivers to One Antenna Recommended EquipmentSection Topics Setting Forced Tune Events Forced Tune EventsChecking Forced Tune Events Clearing Forced Tune Events   Local Channel Management Deleting Authorized ChannelsAdding Authorized Channels Setting the Dynamic Range Checking Dynamic Range Settings Setting the Dynamic Range Global DefaultClearing the Dynamic Range Setting the Transponder Frequency Checking Signal Quality Checking the Transponder Frequency12 dB DMX/DJ Functions Setting the Front Panel LockoutFront Panel Lockout Clearing the Front Panel LockoutChecking the DR500’s Status MoreMaintenance Cleaning the DR500 ReceiverTroubleshooting Tips Problem Possible Causes SolutionsDMX/DJ Remote control Audio Specifications Warranty Statement Return Procedures  DMX Affiliates Technical Installation Information Appendix C

DR500 specifications

The Philips DR500 is a cutting-edge digital radiography system designed to enhance imaging performance while ensuring a streamlined workflow and patient comfort. With a robust set of features, the DR500 combines advanced technologies to meet the needs of modern medical facilities.

One of the primary features of the Philips DR500 is its innovative detector technology. It is equipped with a high-resolution flat-panel detector that delivers exceptional image quality with minimal radiation exposure. This is crucial for patient safety while allowing healthcare professionals to achieve accurate diagnoses. The detector's fast image acquisition speeds mean that examinations can be completed more swiftly, enhancing overall operational efficiency.

The DR500 also boasts a user-friendly interface that simplifies the imaging process for radiologists and technicians alike. The touchscreen interface is intuitive, allowing for quick adjustments and settings configuration. This ease of use is complemented by automated features that reduce the likelihood of human error and improve consistency in results.

Another significant characteristic of the Philips DR500 is its versatile imaging capabilities. The system supports various radiographic applications, from general radiography to specialized procedures. This versatility makes it a valuable addition to hospitals and clinics that require a wide range of imaging modalities. It proficiently handles different patient demographics, including pediatrics and geriatrics, adapting to their unique needs.

Connectivity is a hallmark of modern imaging systems, and the DR500 excels in this area. With advanced networking capabilities, it seamlessly integrates with existing Picture Archiving and Communication Systems (PACS) and electronic health records (EHRs). This ensures that images can be stored, retrieved, and shared effortlessly among healthcare providers, improving collaboration and enabling quicker clinical decision-making.

Moreover, the Philips DR500 prioritizes patient comfort. Its ergonomic design allows for easy access and positioning, making the imaging process less stressful for patients. Enhanced features such as auto-positioning and customizable protocols contribute to a smoother experience, fostering a patient-centric approach in diagnostic imaging.

In summary, the Philips DR500 represents a significant advancement in digital radiography. Its combination of high-quality imaging, user-friendly operation, and integrated connectivity positions it as a preferred choice for healthcare facilities aiming to improve diagnostic accuracy and patient care. With its adaptable design and advanced technologies, the DR500 stands out as a powerful tool for today's medical imaging needs.