Philips LX3750W warranty Sound and Volume Controls, Selecting the surround sound, Mode, Effect

E n g l i s h

Sound and Volume Controls

	Selecting the surround sound		● Movie mode
			The movie mode is for use with stereo television shows.
	mode
			The result is enhanced soundfield directionality that
	IMPORTANT!		approaches the quality of discrete 5.1-channel sound.
	– For proper surround sound, make sure you have		● Music mode
	followed the “Connections” and “Preparations”		The Music mode is for use with any stereo music
	procedures fully.		recordings, and provides a wide and deep sound space.
	– The center and surround speakers only operate
	when the system is set to surround sound mode and		VSS (Virtual Surround Sound)
	the source material being played is recorded or		The Prologic MPEG or Dolby Digital surround channel is
	broadcast in Dolby Digital Surround,DTS,Dolby Pro		processed by a ‘virtualizer’ DSP to add surround effect from
	Logic or ProLogic II surround sound.		just the two front speakers.
	– Stereo broadcasts or recordings will produce
	some surround channel effects when played in a		Stereo
	surround mode. However, monaural sources will not		All sound is reproduced and played through the front left
	produce any sound from the surround speaker.		and right speakers. This enables standard stereo
● Press SURROUND to select surround or stereo mode.			reproduction.
	➜ The availability of the various surround sound modes
	depend on the number of speakers used and the incoming
			Selecting the digital sound
	sound information available on the disc.The available
			effect
	surround modes are shown below.
	Dolby Digital Surround		The digital sound effects allows you to select from various
			pre-set modes that control the frequency bands of sound
	Dolby Digital (also known as AC-3 or Dolby 5.1) and MPEG
			to optimize certain musical styles. It greatly enhances the
	Multichannel delivered a realistic and dynamic sound similar		excitement and enjoyment of your favorite music.
	to theater and cinema. It requires connection of all five
	speakers (front left/right, centre, surround left/right) and	● Press SOUND repeatedly to select the available sound
	subwoofer for correct Dolby Digital Surround sound		effect.
	reproduction. Each channel plays its own unique role in
	providing the right sound. Front left, center and front right		When playing a DVD/VCD, select :
	join two surround speakers to reproduce high, mid and bass		–	CONCERT, DRAMA, ACTION, SCI-FI
	frequencies in five full-range channels of surround. Bass rumble,
	explosions and low frequency effects you feel are delivered		When playing a CD/MP3 or in Tuner or AUX-ANA
	through the subwoofer. A large number of DVD discs are		mode, select:
	recorded in Dolby Digital Surround.		–	JAZZ, ROCK, DIGITAL, CLASSIC
	DTS Surround		When DIGITAL IN received DTS or Dolby
	The DTS Surround is a cinema surround sound format that
			DIGITAL format, select:
	offers superior digital audio performance. DTS offers more		–	CONCERT, DRAMA, SCI-FI, ACTION
	clarity and definition especially for higher tones. The better
	sound quality is a result of the limited sound compression		If received other signal format, select:
	(3:1 instead of 11:1 for Dolby Digital) and the 20-bit resolution.		– JAZZ, ROCK, DIGITAL, CLASSIC

Dolby Pro Logic Surround

The Dolby Pro Logic Surround system is a specially encoded two channels analog format that will produce sound through four speaker channels (front left, center, front right, monaural surround) when a Dolby Pro Logic Decoder is used. It is also compatible with stereo systems but the user will only have two channels (Front Left & Right) of sound.

Dolby Pro Logic II Surround

Dolby Pro Logic II Surround creates five full bandwidth output channels from two-channel sources. This is done using an advanced, high purity matrix surround decoder that extracts the spatial properties of the original recording without adding any new sounds or tonal colorations.

28 SOUND AND VOLUME CONTROLS