Philips HTS6600 Important notes for users in the U.K Mains plug, How to connect a plug, Italia

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fi tted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3Refi t the fuse cover.

If the fi tted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fi tted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

–Connect the blue wire to the terminal marked N or coloured black.

–Connect the brown wire to the terminal marked L or coloured red.

–Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio HTS6600, Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven, The Netherlands

Norge

Typeskilt fi nnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

ATTENTION!

For Customer Use:

Read carefully the information located at the bottom or rear of your DVD Home Theatre System and enter below the Serial No. Retain this information for future reference.

Model No. HTS6600

Serial No. _______________

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents DVD Hometheatre System Copyright in the U.K How to connect a plugImportant notes for users in the U.K Mains plug ItaliaKlass 1 laseraparat EnglishDisposal of your old product Index Nederlands Deutsch Español FrançaisTable of contents Table of contents General Information Setup precautionsAccessories supplied About recyclingMain Unit Remote Control Title Disc MenuCursor keys Prev / REW ., Next / FFWUsing the remote control Before you start Basic ConnectionsPlacing the speakers Option 2 Connecting to a HDMI- compatible TV Connecting to TVOption 1 Using the Scart socket Component Video OUT Connecting the speakers to subwoofer RightConnect the cable from the subwoofer’s Connecting the FM and AM/MW antennasConnecting the subwoofer to the main unit To Main Unit to the toConnecting the power cord Standby LED on the main unit lights upConnecting to cable box/ satellite receiver and recorder/VCR Optional ConnectionsMounting the main unit on the wall Mounting the speakers on the wall Ambisound Setup and press cursor right key to select Finding the correct viewing Setting the speakers ChannelGeneral Setup Page menu appears Getting StartedSelect Listening Position and press Cursor right key Press Setup to exit the menuSelect Speaker Distance and press cursor right key On-screen display OSD language Setting language preferencesGeneral Setup Page appears Audio, Subtitle and Menu language for DVD playbackPan Scan Setting the TV DisplayRepeat steps C ~ D for other settings Letter BoxMessage appears on the TV Confi rm your action by selecting Setting up Progressive Scan featureFor Progressive Scan TV only Can start to enjoy the high quality pictureAM/MW band Switching to different play sourceTurning off to low power standby mode Press and hold LEDs brightness on the main unit dims downPlaying a disc Disc OperationsPlayable discs Basic playback controls Selecting various repeat/ shuffle functionsProgramming disc tracks Other playback features for video discs DVD/VCD/ SvcdUsing the Disc Menu Appears on the TV Switching camera anglesViewing playback information Zooming in/outFor VCD changing the audio channel Setting the delay times for audio playbackFor VCDs with Playback Control PBC feature version 2.0 only Press Audio SyncPlaying a MP3/ WMA disc Disc menu appears on the TVPreview function Playing a Jpeg image file slide showSupported file format Zoom pictureTo stop simultaneous playback, press Disc Menu followed by Playing a DivX discSelect a track in the menu and press u to start playback Playback USB Device Playing from USB flash drive or USB memory card readerPlayback Other Audio Player Playing from other portable audio playerSetup Menu Options Accessing the setup menu70% Ambisound Setup Disc LockDisplay Dim OSD Language Screen Saver Sleep 40%All Hdmi AudioDigital Audio PCM onlyTV Type TV Display Picture SettingHdmi Setup NtscComponent Progressive Turn on progressive scan modeOff Turn off the progressive scan mode Parental MP3/JPEG NavPress OK to access the change password menu PasswordPassword is ‘0000’. To change the password DivX Subtitle DefaultUsing auto install Tuning to radio stationsPresetting radio stations Radio OperationsUsing automatic preset Selecting a preset radio stationDeleting a preset radio station Using manual presetAdjusting the Bass/ Treble level Sound and Volume ControlsVolume control Selecting digital sound effectsNever unplug or turn off this unit during the upgrade Other FeaturesInstalling the latest software When the disc compartment opens, remove the CD-RSolution TroubleshootingEnglish Problem General Press STANDBY-ON on the unit to turn on the powerUnit does not start Problem Playback SolutionNot able to select some items in the setup/system menu PlaybackProblem USB/HDMI Solution Why can’t I rotate the pictures in my device? Frequently Asked Questions USBWhat happens when I plug in a USB HDD? What types of file does this unit support?Specifications AmplifierGlossary Glossary Fi le extension ‘WMA’
Related manuals
Manual 2 pages 49.99 Kb

HTS6600 specifications

The Philips HTS6600 is a formidable home theatre system designed to create an immersive audio-visual experience. This all-in-one solution combines advanced audio technologies with elegant aesthetics, making it a popular choice for home entertainment enthusiasts.

One of the standout features of the HTS6600 is its sleek design. With a stylish, contemporary appearance, it fits seamlessly into any living room setting. Its compact form does not compromise on performance, as it packs a powerful punch in audio and video quality. The system includes a DVD player, supporting various formats and ensuring that users can enjoy their favorite movies without hassle.

At the heart of the HTS6600 is its impressive audio technology. It utilizes Philips' proprietary virtual surround sound technology, which creates an expansive soundstage, providing an immersive surround sound experience even from a compact setup. The integrated subwoofer enhances low-frequency sounds, delivering deep and resonant bass that elevates the overall audio experience. The system supports Dolby Digital and DTS formats, further ensuring high-quality sound reproduction.

Connectivity is another area where the HTS6600 shines. It features multiple HDMI inputs, allowing easy connection to various devices such as gaming consoles, Blu-ray players, and set-top boxes. The high-definition video output guarantees that users can enjoy stunning visuals while watching their favorite movies or shows. Additionally, the system includes USB and AUX inputs, enabling users to connect their personal devices, such as smartphones and tablets, to enjoy their music or videos seamlessly.

For the convenience of modern users, the HTS6600 includes the Philips EasyLink feature, which allows control of multiple HDMI CEC devices using a single remote. This simplifies the user experience, making it easier to navigate through different inputs and settings without juggling multiple remotes.

In terms of versatility, the HTS6600 also features a multi-format playback capability, supporting various media formats. This means users can watch DVDs, CDs, or even playback from USB drives. The system’s built-in quality enhancement features further enhance the clarity and fidelity of the content, bringing visuals to life.

Overall, the Philips HTS6600 stands out with its combination of sleek design, advanced audio technology, and versatile connectivity options. It provides an excellent solution for those looking to elevate their home entertainment experience, making it a valuable addition to any home cinema setup.
Top Page Image Contents