Basic Connections (continued)
TV AUDIO IN (TV 2)
TO SUBWOOFER
COMPONENT
VIDEO OUT
TV AUDIIO IN (TV 2)
TO SUBWOOFER
English
Option 3
SCART OUT (TV1)
Pr
Pb
Y
COMPONENT
VIDEO OUT
HDMI OUT
Option 3: Connecting to a Progressive Scan TV or component video input
The progressive scan video quality is only available when using Y Pb Pr connection and a progressive scan TV is required. It provides superior picture quality when watching DVD movies.
A Use the component video cables (red/ blue/green - not supplied) to connect the
COMPONENT VIDEO OUT
(Y Pb Pr) sockets on the main unit to the corresponding component video input sockets (or labelled as Y Pb/Cb Pr/Cr or YUV) on the TV.
B If your TV accepts progressive signals, proceed to chapter ‘Getting Started - Setting up Progressive Scan feature’ for detailed progressive feature setup.
C To hear the TV channels through this unit, use the supplied audio cable to connect the TV AUDIO IN (TV2) to the AUDIO OUT sockets on the TV.
Helpful Hints:
–Audio connection is not required if the main unit is connected to your TV using the SCART connector.
–To hear the TV programmes through this Home Theatre System, press TV button on the remote control to select ‘TV2’ as the sound source you want to listen to.
15