Philips HTS9800W user manual Basic Connections, Assemble the speakers, Positioning for best effect

Basic Connections

Step 1: Assemble the speakers

Both the

B coloured stickers must

match

C

A

Base view of the speaker stand

A Connect the speaker stand with the supplied speaker wire. Match the colour of the speaker wire to the colour of the socket on the base of the speaker stand.

Hold down the socket tab while inserting the stripped portion of the speaker wire into the tab. Then, release the socket tab to lock the wire into position.

B Match the coloured stickers on the rear of the speaker and the inside of the speaker stand. Position the speakers as shown and ensure the connectors fi t. See the above illustration.

C Secure the speaker stand with the supplied screws.

Helpful Hint:

–When you insert the speaker wire, make sure none of the rubber-coated wire is clamped by the socket tab.

Step 2: Positioning for best effect

The Philips HTS9800W Home Theatre System is simple to install. Proper system placement is critical to ensure an optimum sound experience.

The placement diagrams shown here are only guidelines that provide great system performance, you may fi nd other placement choices that are more suitable for your room layout and provide the sound experience you enjoy.

Placing the speakers

When placing the speakers, ensure that:

–The centre speakers (FRONT CENTER, REAR CENTER) should be placed at the same height and at the normal listening ear level for the best sound performance.

–The front speakers should be placed at an equal distance from the TV, the FRONT RIGHT on the right hand side and FRONT LEFT on the left hand side (as shown below).

–The rear speakers should be placed at equal distances from the REAR CENTER speaker; the REAR RIGHT on the right hand side and REAR LEFT on the left hand side. (as shown below).

FRONT LEFT	FRONT CENTER	FRONT RIGHT
	TV
REAR		REAR
LEFT		RIGHT
	REAR CENTER

English

13