Philips HTS9800W Progressive, Component option. See next page Video Setup, Component for details

DVD System Menu Options (continued)

Video Setup Page (underlined options are the factory default settings)

Progressive	In the progressive scan mode, you can enjoy high quality picture
	with less fl ickers. It only works when you have connected the
	Y Pb Pr sockets on the Junction Box to your TV that supports
	progressive video input. Otherwise, the image may not appear or
	will be distorted.
	This option is only available if you have selected { YUV } in the
	{ Component } option. See next page “Video Setup Page –
	Component” for details.
	{ Off }	– Disable the progressive scan function.
	{ On }	– Enable the progressive scan function.

Note: If no picture appears, wait for 15 seconds for auto recovery. Otherwise, turn off the progressive scan as below:

1)Press çEJECT on the DVD system.

2)Press X on the remote control.

3)Press SUBTITLE on the remote control.

Picture Setting This DVD system provides three predefi ned sets of picture colour settings and one personal setting which you can defi ne yourself.

{Standard } – Original colour setting.

{Bright } – Vibrant colour setting.

{ Soft } – Warm colour setting.

{Personal } – Select this to personalise your picture colour by adjusting the brightness, contrast, tint and

colour (saturation).

Use W X keys to adjust to the setting that best suit your personal preference and press OK to confi rm. For an average setting, select { 0 }.

English

Personal Picture Setup

Brightness

Contrast

Tint

Color

{Brightness }

Increase this value to brighten the picture colour or vice versa.

{Contrast }

Increase this value to sharpen the picture colour or vice versa.

{Tint }

Increase or decrease this value to change the colour phase of the picture.

{Color }

Increase this value to enhance the picture colour or vice versa.

41