Epson R210 manual 、Reset Procedure, 、Refill Ink, 9Nineth step Nozzle check

Page 6

9)Nineth step: Nozzle check

进入打印机喷嘴检查选项

Usual

Broken line

The nozzle check patterns are in broken-line, mostly because of small dusk entered into the nozzle, after repeated cleaning, if there is still a few broken line, pls let the printer don’t work about 1 hour, then print the nozzle check pattern, maybe it works well.

4、Reset Procedure:

If the indicator light flashing when printing, it tells that you need to reset the chip to full status. Please turn off your printer for about 30 seconds and switch it back on. Ink meter bar shall show full ink. You can start printing as usual.

5、Refill Ink:

Image 6

Contents For ST Prefilled Version With Auto Reset Chips 、Printer testing 、General GuideFirst step 、Installation ProceduresThird step Set up the Continuous Ink Supply System ）Second step Remove cartridgeFourth step Set up the Continuous Ink Supply System Fiveth step Fix Support ArmSixth step Install tubeline Seventh Step Adjust the tubeline、Reset Procedure 、Refill Ink9Nineth step Nozzle check How to install the cover of cartridge 、Attention for maintenance