1) First step
Put the CISS on the left side | Pull out the small rubber plug |
of the printer. In the meantime | from the air hole as above |
place all the tubes at correct | picture shown. |
position. |
|
2) Second step: Remove out the original cartridges
Place 4pcs of air filters into air holes, the thicker side is down into tank.
press the ink cartridge replace button | to make the small cart button | Draw out the electrical | ||||
|
|
| move to the position which | Source | ||
|
|
| ready to change the ink |
| ||
|
|
| cartridges |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Remove profile spring the on the cart, second open the cover to certain degree, then insert the screwdriver at the connection which between the cart and the right side of the cover.
And screw the screwdriver in clockwise till the right side of the cover divide from the connection on the cart, then take down the cartridge cover