The tube is excessive long, it is not ok.
The tube is twist ,it is not ok. | In this situation ,it is ok |
7)、The seventh step
Stick the support arm at the | Insert the electrical source | Power on the printer to check |
Position as show in the picture | line suitably | whether the printer works well |
For conveniently uphold the cover. |
| |
8)、The eighth step: Checking the printing head
Enter this item
Normal 
Nozzle check is normal, start printing
Abnormal
Pls clean printing head
If there show breaks, please clean your printing head. It is possible that the wispy air have entered into the printing head. If it is still show little breaks specially show in one color, it no need to repeatedly continue to clean. Just keep the printer silent for about one hour, it may disappear. If after testing, it still abnormal, please kindly to contact with local dealer.