Troubleshooting
Problem
The remote control does not function properly.
The time is not working.
The Clock/Timer setting is erased.
The USB device doesn’t play on my MCM177
Solution
✔Select the source (CD or FM, for example) before pressing the function button (É,í,ë).
✔Reduce the distance between the remote control and the system.
✔Insert the batteries with their polarities (+/– signs) aligned as indicated.
✔Replace the batteries.
✔Point the remote control directly towards the IR sensor.
✔Set the clock correctly.
✔Press TIMER ON/OFF to switch on the timer.
✔If recording or tape dubbing is in progress, stop recording.
✔Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.
✔It is not set in the USB mode. Select USB mode.
✔The device is not securely connected to MCM177’s USB port.
✔The device is not supported by MCM177, or the audio file format stored on the device is not supported by MCM177. Use a compatible device/ playable audio file format.
English
23