SOLD BY laptopia2005 DO NOT RESELL!!
Field Service Guidelines
Figure 4-4 The System Board and I/O Boards
Separating the System Board and I/O Board
The system board is attached directly to the I/O board. The following procedure should be taken to separate the two boards:
1.Turn off the computer. Follow all disassembly procedures mentioned from the start of this section.
2.Remove the four medium spacers located along the top and left side edge and the one screw located at the center bottom of the system board.
3.Slowly separate the I/O Board and system board, being cautious about the con- nectors coupling the two boards together.
4.To reattach the I/O Board and system board, reverse the separation procedures mentioned above.