Message: Source is in wrong state for enabling.
Description/Action: Exit and restart the Brightness and Contrast Control application. If the error occurs again, open the Scan Validation Tool to verify that it is working properly. If it is, call Kodak Service for assistance with the Brightness and Contrast Control. If the Scan Validation Tool is not working properly, contact Kodak Service for assistance with the scanner.
Message: Source failed to enable.
Description/Action: Exit and restart the Brightness and Contrast Control application. If the error occurs again, open the Scan Validation Tool to verify that it is working properly. If it is, call Kodak Service for assistance with the Brightness and Contrast Control. If the Scan Validation Tool is not working properly, contact Kodak Service for assistance with the scanner.
Message: Unsupported scanner.
Description/Action: The Brightness and Contrast Control can only be used with Kodak scanners. Be sure the TWAIN Source you selected is for a Kodak scanner.
Message: Unsupported or non-existent scanner.
Description/Action: The Brightness and Contrast Control can only be used with Kodak scanners. Be sure the TWAIN Source you selected is for a Kodak scanner.
Message: Cannot open specified Color Table file.
Description/Action: There may be a problem with the specified color table. If the table selected is a default Kodak color table, reinstall the Scan Validation Tool. If this is a custom color table, you may need to recreate the color table unless you are able to restore from a backup copy.
Message: The specified color table file is not writable.
Description/Action: The Brightness and Contrast Control was unable to open the specified color table file for output. This error may occur if the color table is an original distribution color table (e.g., photo.ekct) and the Brightness and Contrast Control will not overwrite it. It could also mean that there is a bad file name, the file is
Message: The specified color table format is unsupported.
Description/Action: Color tables must have the .ekct extension. Only tables provided by Kodak or created with the Brightness and Contrast Control are supported.
Message: Incorrect checksum detected in Color Table file.
Description/Action: Color tables must have the .ekct extension. Only tables provided by Kodak or created with the Brightness and Contrast Control are supported.
22 |