Using the Brightness and Contrast Control
This Reference Guide provides information and procedures for the Brightness and Contrast Control.
Kodak provides a set of default color tables with the scanner. These tables are bundled and installed with the Scan Validation Tool (SVT).
A color table is a file that can be downloaded to the scanner which contains the information required for the scanner to output the desired representation of your color document.
If the default color tables do not meet your specific needs, this tool may be used to create your own custom color table. This custom color table can then be downloaded to the scanner and used in production.
The color table to be used for front and rear images are set independently. When scanning, only one color table can be applied to each image (front or back). You can use the same color table for both the front and the back, or use one color table for the front and one color table for the back.
Use the Scan Validation Tool or your own application to download a color table to the scanner.
For more information regarding the Brightness and Contrast Control, see Appendix A, Color Concepts.
IMPORTANT:
•The Brightness and Contrast Control is not color management software. The output from the Brightness and Contrast Control cannot be used to modify monitors or printers. It is only intended to modify the color image as produced by the scanner.
•Images created using a custom color table created using a specific monitor may appear differently when viewed or printed on other monitors or printers.
•Images used in this Reference Guide are for concept purposes only and do not represent the expected image quality.
•Creation, use and management of any custom color table is your responsibility. Kodak provides no support beyond verifying scanner functionality using Kodak default color tables.
1 |