Philips FWV357/55 manual Demonstration mode, Switching the system on, Dim mode, Volume control

Basic Functions

English

Demonstration mode

The system has a demonstration mode that shows the various features offered by the system.

To activate the demonstration

●In standby mode, press and holdÇon the system until "WELCOME" is displayed.

➜ The demonstration will begin.

To deactivate the demonstration

●Press and holdÇon the system until "DEMO OFF" is displayed.

➜ The system will switch to standby mode.

Note:

–If you have not deactivated the demonstration, it will resume five seconds after the system switches to standby mode.

Switching the system on

In standby/demonstration mode

●Press STANDBY ON to switch on the last selected source.

●Press VCD 1/2/3 (VCD.CD 1/2/3), TUNER, TAPE (TAPE 1/2) or AUX.

●Press OPEN/CLOSE.

➜ The system will switch to CD mode.

Switching the system to standby mode

In demonstration mode

●Press and hold Ç on the system.

In any other source mode

●Press STANDBY ON (or B on the remote control).

➜ The clock will appear on the display when the system is in standby mode.

Dim mode

You can select the desired brightness for the display.

●In any source mode (except standby mode), press DIM repeatedly to select : DIM 1, DIM 2, DIM 3 or DIM OFF display mode.

➜ DIM is shown, except for DIM OFF mode.

DIM	Brightness	Spectrum
mode		Analyser
1	normal	off
2	half	on
3	half	off
OFF	normal	on

Note:

–In standby mode, pressing DIM to select half or full brightness for clock display.

Volume control

Adjust MASTER VOLUME (or press VOLUME + or - on the remote control) to increase or decrease the volume level.

To listen through the headphones

● Connect the headphones plug to

the n socket at the front of the	MIC
system.
➜ The speakers will be muted.

14