Philips HTS3154 user manual Speakers Volume, Speakers Delay, CD Upsampling

Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Speakers Volume	Access the speaker’s level setup menu. Use		keys to adjust
	the volume level for each connected speaker between -6dB to
	+6dB. See ‘Getting Started - Setting the speakers’ channels’.
Speakers Delay	Access the speaker’s distance setup menu. Use		keys to set
	the delay times for the centre and rear speakers based on the
	listening position and distance. See ‘Getting Started - Setting
	the speakers’ channels’.
	Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
	change in distance. Use the longer delay time settings when the rear
	speakers are closer to the listener than the front speakers.
CD Upsampling	This feature enables you to convert the music CD to a
	higher sampling rate using sophisticated digital signal
	processing for better sound quality.
	{ Off }	– Turn off CD-upsampling.

{88.2 kHz (X2) } – To convert the sampling rate of the CDs twice as high as the original rate.

Notes:

– If you have activated the CD upsampling feature, the audio output automatically switches to stereo mode.

– If you press the SURROUND button on the remote control to select multi-channel mode, it turns off the CD upsampling feature.

Audio Sync	This feature allows you to adjust the audio delay times if the
	video playback is slower than the audio output streams.
	Use	keys to set the delay times for the audio output

between 0~200ms.

English

37