Kodak 9500, 923, 70, 990, 900 manual Operating the scanner with the Multi-Feed Detector enabled

Page 5

Operating the scanner with the Multi-Feed Detector enabled

When the Multi-Feed Detector is enabled, the scanner is continuously checking documents for multi-feeds when the transport is running. When a multi-fed document is encountered, an error will be reported. The scanner will report a document as a true multi-fed document if it overlaps another document by ¾ of an inch or more.

When a multi-feed is detected, one of the following errors will occur (depending upon how the scanner is configured):

If the scanner is setup to stop and display an error, an E204 message will be displayed. The transport will stop and both Multi- Feed Detector indicators will be illuminated. To recover from an

E204 error:

-reset the image address

-reset the document stack

-start the transport again

If the scanner is setup to beep and display an error or just display an error, an E107 message will be displayed. The transport will continue to run, and both Multi-Feed Detector indicators will be illuminated. To recover from an E107 error:

-reset the image address

-reset the document stack

-press either the Enable, Calibrate or Stop button in order to reactivate the Multi-Feed Detector.

NOTES:

A skewed document can also trigger an E107 or E204 error. If only the Multi-Feed Detector Enable button is illuminated when an E107 or E204 error is displayed, then the document was skewed.

If for some reason, a document misses the Multi-Feed Detector sensor, the error situation described above will also occur (according to the setup of the scanner).

4

A-61120 March 1999

Image 5
Contents User’s Guide Introduction Before you begin Using the Multi-Feed DetectorEnabling/disabling the Multi-Feed Detector Calibrating the Multi- Feed Detector Operating the scanner with the Multi-Feed Detector enabled Retracting the thickness sensor Interactive/online method Error recoveryCondition Cause TroubleshootingCondition Cause Document A G I N G
Related manuals
Manual 101 pages 52.87 Kb Manual 36 pages 38.68 Kb

900, 70, 923, 9500, 990 specifications

The Kodak 9500 is a sophisticated imaging device designed to revolutionize the way professionals engage with photography and imaging technologies. This innovative product combines cutting-edge technology with user-friendly features to enhance the overall shooting experience, making it a top choice among photographers and videographers alike.

One of the standout features of the Kodak 9500 is its high-resolution sensor, which captures images in stunning detail. With a resolution of up to 50 megapixels, this camera allows photographers to produce exceptionally sharp and vibrant photos, making it an ideal choice for commercial photography, fine art, and even landscape photography. The larger pixel size ensures better performance in low-light conditions, allowing for clearer images without the noise that often plagues other cameras.

The Kodak 9500 also boasts an advanced autofocus system. This system employs phase detection technology, ensuring that subjects are locked in focus quickly and accurately, even in dynamic environments. Whether capturing fast-moving wildlife or bustling street scenes, users can rely on the camera's autofocus capabilities to deliver crisp, clear results every time.

Another key feature of the Kodak 9500 is its versatility in terms of shooting modes. The camera offers a wide range of options, including manual, aperture priority, and shutter priority modes. Additionally, the inclusion of various scene modes enables users to achieve optimal results regardless of their level of expertise. This makes the Kodak 9500 accessible to both beginners and seasoned photographers.

In terms of connectivity, the Kodak 9500 incorporates built-in Wi-Fi and Bluetooth technology, allowing for easy sharing of images and videos. Photographers can transfer their work directly to smartphones or tablets and share them on social media platforms without the need for additional software or wires. This seamless connectivity enhances the workflow for professionals who need to present their work quickly.

The build quality of the Kodak 9500 is another aspect worth mentioning. Constructed with a durable magnesium alloy body, the camera is designed to withstand the rigors of professional use. It is also weather-sealed, making it resistant to moisture and dust, allowing photographers to work confidently in various environmental conditions.

In summary, the Kodak 9500 stands out in the crowded camera market with its high-resolution capabilities, advanced autofocus system, versatile shooting modes, and robust connectivity options. Its durable construction makes it a reliable tool for professionals seeking to capture their vision with precision and clarity. Whether you are a seasoned pro or a passionate enthusiast, the Kodak 9500 is an exceptional choice that elevates the art of photography.