Kodak i250, i260 manual Maintenance, Cleaning the Scanner, Cleaning Separator Module

Page 24

Maintenance

Cleaning the Scanner

Cleaning the

Separator Module

The scanner will collect dust and other debris during routine scanning. Follow the procedures in this section and clean the scanner at least once per week.

Clean the scanner and paper path daily if you are scanning carbonless paper or newsprint, or if you are using the imprinter.

NOTES: Some debris from the rubber tires on the feed module and separator module is normal. Tire debris does not always mean that the tires are worn or damaged. After cleaning, inspect the tires for wear and replace the separator module or feed module if necessary.

Staples and paper clips in documents may damage the scanner. Remove all staples and paper clips before scanning.

There are two wear parts that you may replace: the feed module and the separator module.

NOTE: To order cleaning supplies or replacement parts, refer to Appendix B, Supplies and Accessories.

For best scanner performance, clean the feed module rollers, separator module rollers, imaging guides, transport area, and paper path at least once per week. Use only these cleaning materials:

Kodak Digital Science Roller Cleaning Pads (Catalog No. 853-5981)

Staticide Wipes for KODAK Scanners (Catalog No. 896-5519)

Kodak Digital Science Transport Cleaning Sheets (Catalog No. 169-0783)

Use of any other cleaning materials could damage your scanner. In addition to the recommended cleaning supplies, you may use a vacuum cleaner to remove debris from the scanner.

1.Power down the scanner.

2.Remove any documents from the feeder area.

3.Lift up the scanner door release to unlatch the scanner door.

4.Pull up to open the scanner door.

A-61167 September 2002

19

Image 24
Contents Page User’s Guide Contents Using the Scanner MaintenanceTroubleshooting Appendix E Installing Optional Memory Appendix C Kodak i200 Series ImprinterAppendix D Kodak i200 Series Dockable Flatbed Scanner Features IntroductionPaper Transport Features MaintenanceSpeed/Capacity Throughput 200 dpiPreparing Documents for Scanning Recommended DocumentsSafety Information User PrecautionsPage Power System EMC StatementsAcoustic Emission Installing the Scanner Site Specifications System RequirementsUnpacking the Scanner Registering Your Scanner Removing Foam Sheet Scanner Components FrontRear SideInternal Making Connections Power Setup Manufacturer’s power supplyPage Page Tray Extenders and Side Guides Adjusting the Output Tray Using the Scanner Starting and Stopping Scanning Automatic FeedingContinuous Feeding Manual FeedingDamaged Documents Maintenance Cleaning the ScannerCleaning Separator Module Separator module Front roller cover Page Cleaning Imaging GuidesReplacing Wear Parts Replacing Separator ModuleReplacing the Feed Module 1. Power down the scanner Calibrating the Scanner Click CalibrateTroubleshooting Indicator Lights Lamps Clearing Document JamsAdjusting Separator Module Tension System Is Not Responding Color Image Quality Problem Solving Problem Possible SolutionMaintenance section Transporting the ScannerAppendix a Specifications Dimensions Dockable Flatbed WeightOperating Temperature Feature Power ConsumptionAppendix B Supplies and Accessories Catalog NoContents of the Imprinter Kit Appendix C Kodak i200 Series ImprinterInstalling the Imprinter Removing Circuit Board CoverAttaching the Imprinter Board and Cable Support slot Imprinter connector Page Page Completing the Imprinter Installation Page Installing Ink Blotter Strips Purging an Ink Cartridge Installing an Ink Cartridge Setting the Imprinter Position Imprinter Maintenance Imprinting ProblemsWhen the Imprinter Is Not in Use Replacing an Ink Cartridge Expected Life of ImprinterReplacing the Ink Blotter Strips Replacing Ink Cartridge Carrier Print Characters Printable Character SetImprinter Specifications Contents of the Dockable Flatbed Kit Flatbed Specifications Installing the Dockable FlatbedAppendix D Kodak i200 Series Dockable Flatbed Remove the scanner front panel Using the Flatbed Book ScanningClick Calibrate Cleaning the Flatbed After a Power Failure Removing the Dockable Flatbed Press firmly against the right side of the door to latch it Appendix E Installing Optional Memory Circuit board cover Remove the existing memory card from the main control board Eastman Kodak Company

i250, i260 specifications

The Kodak i260 and i250 are high-performance document scanners designed for businesses that require efficient and reliable document management. These models provide exceptional scanning capabilities, making them ideal for environments with high-volume scanning needs such as offices, government agencies, and educational institutions.

One of the main features of both the i260 and i250 is their ability to handle diverse document types and sizes. They can process documents ranging from standard letter-sized sheets to thicker cards, enabling users to scan everything from invoices and forms to identification cards. This versatility is enhanced by their automatic document feeder (ADF), which allows for seamless multi-page scanning. The ADF can hold a significant number of sheets at once, drastically improving workflow efficiency.

In terms of speed, the Kodak i260 and i250 deliver impressive performance. The i250 model can scan up to 50 pages per minute, while the i260 offers slightly lower speeds. Despite this, both models are equipped with advanced imaging technology that ensures high-quality scans. The built-in image processing features include auto-cropping, deskewing, and dynamic thresholding, which optimize the visibility and clarity of scanned images.

Another standout characteristic of these scanners is their commitment to reliability. Kodak’s i260 and i250 are constructed with durability in mind, allowing them to withstand the demands of a busy office setting. The design also incorporates a user-friendly interface, which simplifies operation for users of all skill levels, ensuring that anyone can quickly learn to use the scanners proficiently.

Connectivity options are another highlight, as these devices can easily integrate with various document management systems, which is essential for businesses looking to streamline their operations. The scanners support USB connectivity, making it convenient to connect to a computer or network.

Finally, both models come equipped with Kodak’s Capture Software, which enhances productivity by allowing users to easily manage, edit, and store scanned documents. Overall, the Kodak i260 and i250 offer a powerful combination of speed, quality, and versatility, making them excellent choices for organizations focused on improving their document management processes.