Kodak 2.5.5 manual Scanning Black-and-white or Color Negative Originals

Page 14

10

oXYgen Scan Version 2.5.5 Release Notes

Producing a Gray Image from a Black-and-white or Color Original

To produce a gray image from a black-and-white or color original, you can use either of the following input profiles:

•Tr_ES_Gray: For use with transparent originals

•Ref_ES_Gray: For use with reflective originals

Note: R, G, and B values may not be equal. The input profile converts these values to grays.

Scanning Black-and-white or Color Negative Originals

In the Setup dialog box, select the following options:

•Type: Transparent

•Mode: Color RGB 16 bit or Color RGB 8 bit

•Media: Negative

•Intent: Balanced

Note: If you are producing a color output, in Intent make sure to select Vivid.

•Input Profile: Tr_ES_Gray

•Film Type: AutoBWDefault

Page 13 Page 15
Image 14
Page 13 Page 15
Contents OXYgen Scan Copyright Contents OXYgen Scan Version 2.5.5 Release Notes Overview OXYgen Scan for Scientific ResearchVersion Highlights Minimum System RequirementsInstallation Procedure on Mac OS Application Folder RegistrationRecommendations Documentation FolderFeature Details Numbered Mask DisplayRemoving the Moire Effect in Copydot Scans Bit B/W Mode Negative End Points Dialog Box Scanning Black-and-white or Color Negative Originals Defining a Crop Area for Analysis Using a Naming Convention Quick Balance in Negative Mode Known Limitations
Top Page Image Contents