Kodak 2.5.5 manual Defining a Crop Area for Analysis

Page 15

Defining a Crop Area for Analysis

You can specify that only part of the crop is used for the crop analysis. If you do not use this option to define a crop area, the default for the crop analysis is 90%.

1.Select Setup>Operations Modes or on the keyboard press CMD+K.

2.In the Operation Mode Preferences dialog box, select the Define Area for Crop Analyze check box.

3.In the W box (width or x-axis) and in the H box (height or y-axis), enter a value from 40% to 100%.

4.With the Preview window open, press SHIFT to display the image area currently designated for crop analysis.

Image 15

Contents OXYgen Scan Copyright Contents OXYgen Scan Version 2.5.5 Release Notes OXYgen Scan for Scientific Research OverviewMinimum System Requirements Version HighlightsInstallation Procedure on Mac OS Registration Application FolderDocumentation Folder RecommendationsNumbered Mask Display Feature DetailsRemoving the Moire Effect in Copydot Scans Bit B/W Mode Negative End Points Dialog Box Scanning Black-and-white or Color Negative Originals Defining a Crop Area for Analysis Using a Naming Convention Quick Balance in Negative Mode Known Limitations