CD/VCD/MP3-CD Operation
●You can also press STOP 9 to cancel your play mode.
Text display and ID3 Text
In CD mode
●Press DISPLAY (OSD) repeatedly to see the following information on the display panel.
➜Elapsed play time of current track.
➜Remaining play time of current track.
➜Total remaining play time.
In MP3-CD mode
This feature is used to display the ID3 information for
●Press DISPLAY (OSD) repeatedly to display the ID3 Text (if available) on the TV screen.
Programming the disc tracks
Programming tracks is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order.
1In the disc mode and when disc playback is stopped, press PROGRAM (PROG on the remote) to start programming.
➜For VCD/CD, PROG flashes.
➜For
2Press
Keypad
●For
(ALBUM 3/4 on the remote) and
3Press PROGRAM (PROG on the remote) to
store the track.
●Repeat steps
4 Press ÉÅto start programme playback.
●To end programming without starting playback, press Ç once.
Notes:
–Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before storing tracks.
–If you attempt to programme more than 20 tracks, "FULL" will be displayed.
To review the programme
●Stop playback and press
●To exit review mode, press Ç.
Erasing the program
You can erase the program by:
●pressing 9 twice during playback;
●opening the CD compartment;
●change to other source.
Playing a mixed mode disc
This set can play a mixed mode disc.
Ðmixture of audio CD and
Ðmixture of other combination may not be operated normally.
1As default, audio CD tracks will be read first.
2Press MIX/SEL on the remote control
repeatedly to select other disc modes.
●MP3-CD:
➜MP3 is displayed.
➜On the TV screen, an MP3 menu is displayed.
Note :
For protected CDs, “MIX
English
15